Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > MotorSport > Drag Racing

Drag Racing Discuss Drag Racing here be it dirt or tarmac. Sponsored by Sydney Dragway.

Reply
 
Thread Tools Display Modes
Old 20-06-2008, 10:31 PM   #1
Aldo
Regular Member
 
Aldo's Avatar
 
Join Date: Jul 2007
Location: brisbane
Posts: 192
Default boss 290 mods and et comparison ONLY!

Saw this on ls1.com and thought it would be good to juice up something like that over hear,cuz as we know E.Ts and mph talks..... bullsh!t walks

CAR: Pursuit 61000km

MODS: Elite tune ,bluepower intake, pacemaker 4 to 1,X-force cat back

TRANS: 4 speed auto

DIFF: stock ratio

TYRES: Standard 18" road tyres

POWER: 270rwkw's

TIME: 6oft 2.1
400m 13.3/109mph

It was my first time out when i did this,so with the temps droping im heading out again soon.This time im going to stall it up to 2 grand or so as i only did it to 1200rpm as was a little nervous about damage.
I want a 12sec pass in current form before i add one of the new plenums underdrives and diff gears.

be behaved boys bahahaha.
aldo

__________________
Xw ute
Toploader
Aldo is offline   Reply With Quote Multi-Quote with this Post
Old 20-06-2008, 10:40 PM   #2
ratter
FF.Com.Au Hardcore
 
ratter's Avatar
 
Join Date: Feb 2005
Location: Pit Lane
Posts: 11,867
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Shares his in-depth tuning knowledge with the forum, very helpful. Contributor: For members who make a contribution worthy of recognition. - Issue reason: For his indepth tutorial on adding borders to photographs 
Default

CAR: Pursuit

MODS: Bluepower tune ,bluepower intake, difillipo 4 to 1, Pitlane modified X-force cat back, ss 80 mm TB, underdrives

TRANS: 4 speed auto 3500 stall

DIFF: 4.1 ratio

TYRES: slicks

POWER:

TIME: 6oft 1.66
1/4 m 11.76/116mph
__________________
Pit Lane Performance
20 Rosella St Frankston 03 9783 8122

Authorised Streetfighter, Pcmtec , SCT & HP Tuners Tuning Agent,
ratter is offline   Reply With Quote Multi-Quote with this Post
Old 21-06-2008, 01:56 AM   #3
Quadcams
FF.Com.Au Hardcore
 
Quadcams's Avatar
 
Join Date: Jan 2005
Location: Working, chasing after my daughter and working
Posts: 3,407
Default

Quote:
Originally Posted by Aldo
Saw this on ls1.com and thought it would be good to juice up something like that over hear,cuz as we know E.Ts and mph talks..... bullsh!t walks

CAR: Pursuit 61000km

MODS: Elite tune ,bluepower intake, pacemaker 4 to 1,X-force cat back

TRANS: 4 speed auto

DIFF: stock ratio

TYRES: Standard 18" road tyres

POWER: 270rwkw's

TIME: 6oft 2.1
400m 13.3/109mph

It was my first time out when i did this,so with the temps droping im heading out again soon.This time im going to stall it up to 2 grand or so as i only did it to 1200rpm as was a little nervous about damage.
I want a 12sec pass in current form before i add one of the new plenums underdrives and diff gears.

be behaved boys bahahaha.
aldo
Do you have a high stall convertor (say 3000rpm), if not it would be worth about 4 tenths.
Quadcams is offline   Reply With Quote Multi-Quote with this Post
Old 24-06-2008, 07:18 PM   #4
CAMS290
trying to get a leg over
Donating Member2
 
CAMS290's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 2,690
Default

CAR: Pursuit 45000 k's

MODS: G&D tune ,G&D intake, pacemaker 4 to 1, race pipes
Rest of mods in signature below

TRANS: 4 speed auto & 4000 stall

DIFF: 4.11's
TYRES: Slicks and fron runners

POWER: Approx 285rwkw

TIME: 6oft 1.68
400m 11.84 at 118

Weight reduction including light weight drivers seat, slider bars on rear end, tail gate off etc....just like everyone else.lol
And my fat *** driving 110 kg's
__________________
Cameron
------------------------------------------------------
CAMS290 is offline   Reply With Quote Multi-Quote with this Post
Old 25-06-2008, 01:26 AM   #5
GTP370
2005 BA II GTP
 
GTP370's Avatar
 
Join Date: Nov 2007
Location: Sydney
Posts: 2,676
Technical Contributor: For members who share their technical expertise. - Issue reason: Excellent breakdown of costs associated with importing a pre-89 car from the U.S.  Very helpful to others and at least two other guys will use the provided info to make their dreams reality.. 
Default

CAR: GT-P 33000 k's

MODS: Herrod headers and exhaust, X-Force cats, Herrod supplied exhaust cams, Herrod 75mm spacer, intake snorkel and hi flow cold air unit, billet oil pump gears, under drive pulleys, Yella Terra super charger @ 10psi and intercooler kit, 60psi injectors and bigger fuel pump, Z-grip clutch/billet flywheel and upgrade slave cylinder, Rip shifter, Chomemoly billet CV shafts.

TRANS: 6 speed manual

DIFF: factory

TYRES: M/T Streets

POWER: 374rwkw tuned by Autotech

TIME: 6oft 1.983
400m 12.319 at 115.58, all credit to Wade on this run (Wade's been helping me out with his superb driving skills).

4.1 diff gears being fitted tomorrow, next week complete upgrade on blower and intercooler set up.

Cheers, Paul.
GTP370 is offline   Reply With Quote Multi-Quote with this Post
Old 25-06-2008, 09:11 AM   #6
Bluepower
KenneBell Australia
 
Bluepower's Avatar
 
Join Date: Nov 2005
Location: Engine building room
Posts: 1,965
Default

CAR - Black BA ute

MODS FOR NA - Crow GTP camshafts, Billet pump Gears, Difilippo 1 7/8 headers, Bluepower Airbox and custom tune stock heads and bottom end

MODS FOR S/C - as above, BPR Kenne Bell kit @ 9psi

MODS FOR S/C and NOS - universal EFI NOS kit 50 shot

TRANS NA - BPR prepped 4spd 3500 stall

TRANS SC - same but with 2500 converter

DIFF NA - BPR built 4.1

DIFF S/C - BPR built 3.46

TYRES - MT ET Drag slicks, 26x10

POWER NA -

POWER SC -

TIME NA - 11.67@120MPH

TIME SC - 10.40@ 135MPH

TIME SC/NOS - 10.05@136

1800kg inc driver (blown setup)
__________________



Bluepower Racing Developments

Proud Australian Distributors of Kenne Bell superchargers
The Quickest, The Fastest, The Baddest Boss Blower of all.

www.bluepower.com.au



Bluepower is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 25-06-2008, 10:18 AM   #7
Craig
RIP Craig - 13/11/08
Donating Member1
 
Craig's Avatar
 
Join Date: Feb 2005
Location: Kilmore, 30 minutes from Heathcote Raceway
Posts: 3,571
Default

CAR: BA GT-P Mk2

MODS: Di Filippo 1-7/8", Blue Power CAI & Tune, Underdrives, Tex/Craig Clutch

TRANS: 6-speed manual with Rip Shifter

DIFF: 4.10

TYRES: Slicks and front runners

POWER: 280 + rwkw's

TIME: 6oft 1.69
400m 11.96 118.98 mph

WEIGHT: 1736 kgs or there abouts.

Thanks to John from Racers Edge for the Pic


Last edited by Craig; 25-06-2008 at 10:41 AM.
Craig is offline   Reply With Quote Multi-Quote with this Post
Old 25-06-2008, 10:28 AM   #8
superpursuit83
KITTY Crew Member
 
superpursuit83's Avatar
 
Join Date: Sep 2005
Location: WA
Posts: 5,267
Default

Oh man you guys can drive.

I cracked 12.999999999 with the same mods as above before SC.
__________________
FOR SALE

BAII Super Pursuit 0083

Awsome power by XTREME FORD TUNING 500rwkw New ALLOY Block

Awesome exhaust by THE EXHAUST CENTRE MIDLAND


Awesome Kenne Bell Supercharger setup by AGRO! and Bluepower Racing Developments

Now with full DOT approval and Permitted for road use
superpursuit83 is offline   Reply With Quote Multi-Quote with this Post
Old 25-06-2008, 02:13 PM   #9
tweeked
N/A all the way
 
tweeked's Avatar
 
Join Date: Apr 2008
Location: Melbourne
Posts: 3,459
Default

CAR: BA GT 101000km

MODS: Elite tune ,Herrod intake, pacemaker 4 to 1,high flow cats & exhaust

TRANS: 5 speed manual
DIFF: stock ratio

TYRES: MT 17" street radials

POWER: 279rwkw's

TIME: 6oft 1.8
400m 12.66/109.25mph

Full weight (just the spare out)
__________________
BA GT
5.88 litres of Modular Boss Powered Muscle
300++ RWKW N/A on 98 octane on any dyno, happy or sad, on any day, with any operator you choose - [email protected] full weight

tweeked is offline   Reply With Quote Multi-Quote with this Post
Old 25-06-2008, 03:01 PM   #10
DABOSS
BA Black Edition
 
DABOSS's Avatar
 
Join Date: Jan 2005
Posts: 1,437
Default

CAR: BA GT SEDAN 43,000KM

MODS: TUNE , CAI , CAM , Di fillipo 4in1 , Hi stall , UDP, Valve Springs , Pump Gears.

TRANS: 4 speed auto

DIFF: 4.10

TYRES: 275 19" Hancook Road tyres

POWER: 295rwkw's

TIME: 6oft 1.93
400m 12.41/114.85mph

Full Weight ( 1875kg's )
__________________
"With enough money anything can be done"
"First BA to run a 12 on street Tyres and full weight back in the day, And still the quickest street BA GT in OZ"
DABOSS is offline   Reply With Quote Multi-Quote with this Post
Old 25-06-2008, 05:39 PM   #11
GTP owner
FF.Com.Au Hardcore
 
GTP owner's Avatar
 
Join Date: Sep 2006
Location: TAS
Posts: 2,551
Default

Car - BA GTP, 15,000km

Mods: CAPA generic tune, SS CAI, Herrod power snorkle thingy

Trans: 5 speed manual

Diff stock

Tyres - the original Dunlops

Power: 225rwkw - damn those mods made no difference.

Time: 13.7 @165km/h

Weight 1880 -plus me at 115kg
__________________
XA coupe 8.8sec @ 150mph http://www.fordforums.com.au/showthr...coupe+drag+car
BA GT-P for the shed
Mustang GT for the other half
E3 chubsport - fully fat (and slow), sitting there waiting for me to get sick of it and sell it.
BA XR6T for a daily
NT Pajero for the bush
XB 4 door project- swallows a BF xr6 turbo

My dad is a generous bloke. He gave away his dead car batteries free of charge....
GTP owner is offline   Reply With Quote Multi-Quote with this Post
Old 30-06-2008, 04:20 PM   #12
tweeked
N/A all the way
 
tweeked's Avatar
 
Join Date: Apr 2008
Location: Melbourne
Posts: 3,459
Default

Quote:
Originally Posted by GTP owner

Mods: CAPA generic tune, SS CAI, Herrod power snorkle thingy


Power: 225rwkw - damn those mods made no difference.
Time for a custom tune, you have built it, rwkws will come :
__________________
BA GT
5.88 litres of Modular Boss Powered Muscle
300++ RWKW N/A on 98 octane on any dyno, happy or sad, on any day, with any operator you choose - [email protected] full weight

tweeked is offline   Reply With Quote Multi-Quote with this Post
Old 01-12-2019, 12:13 PM   #13
TE50
Starter Motor
 
Join Date: Oct 2014
Posts: 12
Default Re: boss 290 mods and et comparison ONLY!

Thought I might revive this thread.

BA GT 6SP manual 1810kg+115kg driver

Stock exhaust with gutted cats and middle muffler swap.
Air filter and cover removed
Mace Engineering plenum spacer
Half shafted and knife edged stock throttle body
Tuned by myself
4:11's

60'- 1.90
ET-12.78
Mph 110.34

Temp was 31degrees at willowbank.
TE50 is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 31-07-2020, 12:32 AM   #14
TE50
Starter Motor
 
Join Date: Oct 2014
Posts: 12
Default Re: boss 290 mods and et comparison ONLY!

Edit- Went back with hurricane stepped headers, dropped exhaust and lighter wheels and passenger seat removed
Although with a 125kg driver

60ft 1.91
Et-12.37
MPH 112.5

Unopened, 6sp manual BA GT N/A

I need to sort this 60' out 😅
TE50 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 31-07-2020, 01:10 AM   #15
fnp
Regular Member
 
Join Date: Oct 2019
Posts: 193
Default Re: boss 290 mods and et comparison ONLY!

CAR: FG XR8 was around 200000km

MODS: Under-drive pulleys

TRANS: 6-speed manual

DIFF: Stock

TYRES: Continental MC6

POWER: 245rwkw

TIME: 13.3 @ 107mph


Got a fair bit more work done now, keen to see what it can do whenever the tracks open again.
__________________
FG XR8 289rwkw
ED Fairmont Ghia 5.0 broken
fnp is offline   Reply With Quote Multi-Quote with this Post
Old 25-03-2021, 08:01 PM   #16
95nfGhia
Diff Breaker
 
95nfGhia's Avatar
 
Join Date: Jan 2007
Location: rowville
Posts: 31
Default Re: boss 290 mods and et comparison ONLY!

Hey guys. Thought id get this going again. Hopefully im not the only one with times to add.

Car: BA XR8 Enforcer

Mods: built bottom end, comp cams, stock 290 heads, di fillipo exhaust, stock plenum t/body, bluepower airbox.

Trans: 6 speed manual

Diff: 4.10

Tyres: et street 275

Power: 320kw

Time: 12.2@116mph, 1.82 60ft

Weight: 1950 with driver

Have since added a yella terra plenum and throttle body. Retuned on e85 making 345kw. On the hunt to get that 11s pass
__________________
05 BA MkII XR8 ENFORCER 6speed manual. Built 5.4, Cams, DPE twin 3" pipes. 320rwkw. Tuned By Maxx Performance
95nfGhia is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 01-04-2021, 07:59 PM   #17
TICKFORD220
2009 xr turbo,2004 fiesta
 
Join Date: Oct 2017
Location: Perth wa
Posts: 662
Default Re: boss 290 mods and et comparison ONLY!

Been watching a few vids of a guy on youtube with a ba gt 6 speed manual,runs 11.80 with cams etc,one of the quickest manual n/a ive seen.
Sounds like an almost identical build to the one underneath my post.
He also ran that time in some of the worst air ive seen lol,over 2000 feet i think
TICKFORD220 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 02-04-2021, 03:02 PM   #18
FPV8U
BOSS 5.4L Enthusiast
 
FPV8U's Avatar
 
Join Date: Aug 2005
Posts: 21,941
Default Re: boss 290 mods and et comparison ONLY!

Quote:
Originally Posted by TICKFORD220 View Post
Been watching a few vids of a guy on youtube with a ba gt 6 speed manual,runs 11.80 with cams etc,one of the quickest manual n/a ive seen.
Sounds like an almost identical build to the one underneath my post.
He also ran that time in some of the worst air ive seen lol,over 2000 feet i think
I think you’ll find that his username TE50 from within this thread.
FPV8U is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 02-04-2021, 08:06 PM   #19
TICKFORD220
2009 xr turbo,2004 fiesta
 
Join Date: Oct 2017
Location: Perth wa
Posts: 662
Default Re: boss 290 mods and et comparison ONLY!

I was quite impressed with everything hes done with it,that 11.8 was done in really bad air and i believe theres another few tenths in it.
People who do all their own mods are what its really about,makes it really worthwhile.
Hopefully he pipes up and keeps us updated
TICKFORD220 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 03-04-2021, 02:12 AM   #20
TE50
Starter Motor
 
Join Date: Oct 2014
Posts: 12
Default Re: boss 290 mods and et comparison ONLY!

Quote:
Originally Posted by TICKFORD220 View Post
I was quite impressed with everything hes done with it,that 11.8 was done in really bad air and i believe theres another few tenths in it.
People who do all their own mods are what its really about,makes it really worthwhile.
Hopefully he pipes up and keeps us updated
G'day mate, that was me. Great to see this thread revived after so many years! Thanks for the kind words, I'm still learning but enjoying sharing it with the 5.4 community.

The DA was actually Around 1550ft with 95% Air density for the [email protected]
60' was 1.806

Air was bad but not as bad as I thought for my final run (previous runs were 2500+) The 12.3 I ran last winter was -550ft so you get an idea there's a little more left in it.

I did that one 11second pass and packed up with the intention of saving the car for cooler weather 🙂

Hopefully I'll see an 11.5x on the current setup with a 1.6x 60' before I build the motor up and shoot for a 10.9x n/a 🙂

Cheers guys, post your runs up ! I love the feel of the older forums, makes me feel young and overexcited again haha.

Oh, and I'll definitely keep everyone update on YouTube too.

Regards,

Blake.
TE50 is offline   Reply With Quote Multi-Quote with this Post
5 users like this post:
Old 02-06-2021, 06:33 PM   #21
Dan_82
BOS330
 
Dan_82's Avatar
 
Join Date: Aug 2015
Location: Vic
Posts: 243
Default Re: boss 290 mods and et comparison ONLY!

Quote:
Originally Posted by TE50 View Post
G'day mate, that was me. Great to see this thread revived after so many years! Thanks for the kind words, I'm still learning but enjoying sharing it with the 5.4 community.

The DA was actually Around 1550ft with 95% Air density for the [email protected]
60' was 1.806

Air was bad but not as bad as I thought for my final run (previous runs were 2500+) The 12.3 I ran last winter was -550ft so you get an idea there's a little more left in it.

I did that one 11second pass and packed up with the intention of saving the car for cooler weather 🙂

Hopefully I'll see an 11.5x on the current setup with a 1.6x 60' before I build the motor up and shoot for a 10.9x n/a 🙂

Cheers guys, post your runs up ! I love the feel of the older forums, makes me feel young and overexcited again haha.

Oh, and I'll definitely keep everyone update on YouTube too.

Regards,

Blake.





getting cold down here now mate road trip
__________________
FG 2009 XR8 UTE All noise. 271.4rwkw
PB 12.938 @ 108.48 1.993 60'

Dan_82 is offline   Reply With Quote Multi-Quote with this Post
Old 09-07-2021, 09:02 PM   #22
TE50
Starter Motor
 
Join Date: Oct 2014
Posts: 12
Default Re: boss 290 mods and et comparison ONLY!

Quote:
Originally Posted by Dan_82 View Post
getting cold down here now mate road trip
I have the All Ford Day onnthe 18th July, then a test n tune on the 24th which should see some good air. Hopefully the track prep is forgiving, I'd love to crack that 11.6x@118mph before I pull the motor.
__________________
BA MkII GT #349 N/A and T56 ET' [email protected] 60ft 1.806 @DA-1550ft
Youtube: https://www.youtube.com/channel/UC--...udzheEZ2HjaZHg
TE50 is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 15-07-2021, 06:25 PM   #23
Dan_82
BOS330
 
Dan_82's Avatar
 
Join Date: Aug 2015
Location: Vic
Posts: 243
Default Re: boss 290 mods and et comparison ONLY!

Quote:
Originally Posted by TE50 View Post
I have the All Ford Day onnthe 18th July, then a test n tune on the 24th which should see some good air. Hopefully the track prep is forgiving, I'd love to crack that 11.6x@118mph before I pull the motor.



will be great if ya do mate.. i was going to heathcote this sunday but the c0ck wombles in power have locked down again
__________________
FG 2009 XR8 UTE All noise. 271.4rwkw
PB 12.938 @ 108.48 1.993 60'

Dan_82 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 05-09-2021, 09:23 AM   #24
galaxiexr
Starter Motor
 
Join Date: Jun 2016
Posts: 3
Default Re: boss 290 mods and et comparison ONLY!

Hey TE 50 i was at All Ford Day and test and tune and we spoke.
I have the silver BA GT manual with a tune and exhaust .
I got 13.32@107MPH best. I will be back to go again probably at next time the test and tune is on a saturday,hope to see you there.
galaxiexr is offline   Reply With Quote Multi-Quote with this Post
Old 21-11-2021, 07:21 PM   #25
Dan_82
BOS330
 
Dan_82's Avatar
 
Join Date: Aug 2015
Location: Vic
Posts: 243
Default Re: boss 290 mods and et comparison ONLY!

Went to Heathcote yesterday and got 10 runs in.



best of the day was



60' 1.993
ET 12.938
mph 108.48




mods. herrod cams, yellaterra plenum. dual 60mmtb, 25%underdrives. truetrac and 3.23 gears kpm airbox, difillipo headers cat and twin 3 inch exhaust.
__________________
FG 2009 XR8 UTE All noise. 271.4rwkw
PB 12.938 @ 108.48 1.993 60'


Last edited by Dan_82; 21-11-2021 at 07:25 PM. Reason: missed some info
Dan_82 is offline   Reply With Quote Multi-Quote with this Post
3 users like this post:
Reply


Forum Jump


All times are GMT +11. The time now is 07:53 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL