2006 Ford Focus Door Lock Actuator Rivet

[TristanAvery]

Just curious what the sizing of the rivet is in the door lock actuator?
And where to get such a rivet in South Australia or just Australia in general.

[GTLEGEND]

Here are all the parts of the front door locking system of a LS LT Focus. I don't see what rivet(s) you are referring to? Can you identify what you need.

LS LT Focus Front Door Locks.JPG

[TristanAvery]

Originally Posted by GTLEGEND

Here are all the parts of the front door locking system of a LS LT Focus. I don't see what rivet(s) you are referring to? Can you identify what you need.

On the actuator that keeps it locked in. Cause the parts that attach it to the metal skin (the bit that has the speaker and the electric window motor, under the door panle) are broken on the one I bought, but the one in the car is still good. So just need to switch out the actual actuator, which is just a plastic clip and drill out the rivet, than re-rivet it.
Cause supposedly its the "Ford N808594-S100", but can only find them from America and in 25 packs and shipping cost like $40

Edit: its also the LHR door lock if that makes any difference, and doesnt have the stick bit (22134B)

[GTLEGEND]

Here are the rear door lock components:

LS LT Focus Rear Door Locks.JPG

As for part number N808594-S100, that was used here in the 2000-2002 Tickford Converted Mustang that held the handbrake bracket to the floor. Obsolete from Ford, I believe its a 6.4 blind rivet. So go to any fastener place and they should be able to help as per example below.

https://www.ebay.com.au/itm/Qty-25-D...UAAOSwkXdd8wgo

[TristanAvery]

Originally Posted by GTLEGEND

As for part number N808594-S100, that was used here in the 2000-2002 Tickford Converted Mustang that held the handbrake bracket to the floor. Obsolete from Ford, I believe its a 6.4 blind rivet.

Cheers for all the help.

[TristanAvery]

An update (bit late).

The ones I bought of ebay, way too big.
Cant remember the size i ended up using, but came with the rivet gun as a set (you know the ones where you get a bunch of sizes) just had to drill the hole a teeny bit larger.
Door now locks with the rest of them