Focus LR - How To Replace ALL the Engine Mounts

[inventiv]

Hey all – happy weekend! I finally managed to replace my motor mounts – all 3 of them, and I made this video showing the steps. If you ever need to swap out any of your mounts, feel free to take a look and follow along. I covered every step I took for all 3 mounts. The Engine Mount, the Transmission Mount and the Torue Link. I even left a timecode at the start of the video at 38seconds, in case you need to jump to the right section in the video. Enjoy and hope you find it useful.

https://youtu.be/c7yWin_3FXA

[inventiv]

Here are the links to the mounts in case you need them:


Engine Mount: https://www.burtonpower.com/vibra-te...ibfor239m.html



Transmission Mount: https://www.burtonpower.com/vibra-te...ibfor244m.html



Torque Link: https://www.burtonpower.com/torque-l...ibfor250m.html

[xr617]

Great video, very informative.
My son's 2003 ST170 (still with original mounts) has a heap of vibration transmitted through to the dashboard/steering wheel and have put this on the "to do" list.
We have already attended to the other usual Focus idiosynchrasies like Oxygen sensors, broken Cat Converter mounting bracket, IMRC throwing up fault codes etc etc...….!

[leakey]

Thanks for the vid. You have far better planning and patience than I did!

Makes a huge difference eh.

[inventiv]

Originally Posted by leakey

Thanks for the vid. You have far better planning and patience than I did!

Makes a huge difference eh.

Yeah mate, enjoying the difference, the old mounts were shot. Not a hard job hey, just fidly.

[brucewarring]

thank you for the video would have loved to have got the mounts you had got mine on ebay $155.00 delivered and fully installed in under two hours....thanks for the video