|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-02-2021, 12:37 PM
|
#1 | ||
|
Starter Motor
Join Date: Jan 2021
Posts: 28
|
Hi all,
I’ve got a 2011 Focus LW 1.6 with 195kms (manual transmission) I only recently bought, and have to fix the power steering assist issue so I’m curious if I should anticipate any other known problems. Engine wise it feel/sounds/drives great. However, I’ve noticed it sometimes (rarely) makes a thud/churn when engaging reverse. And there’s a very slight delay. Other gears are fine. This is my first time with a manual transmission... Is this an indication of some sort of problem on its’ way or to check out? |
||
|
|
|
08-02-2021, 07:09 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2009
Posts: 3,691
|
a lot of 5 speed are clunky going into reverse.
My Fiesta 2008 1.6 was certainly clunky into reverse. The worst was a 6 speed Hino truck with reverse right next to first dam close. Take off at the lights and here the reversing beeper. Woops. quick stop into first. Even my current car a 2020 five speed manual Fabia is sometimes slow to engage reverse. |
||
|
|
LW focus- infrequent thud/noise shifting to reverse (Manual)
Linear Mode
