How to Fill out My 20's

[ORSM-XT]

Hey,

Just wondering if you have any rotors that can fill a 20" wheel? If so how big are they and how much inc GST and Posted to Vic, 3631?

Thanks for your help

Cheerz,

[FLOORED]

Originally Posted by ORSM-XT

Hey,

Just wondering if you have any rotors that can fill a 20" wheel? If so how big are they and how much inc GST and Posted to Vic, 3631?

Thanks for your help

Cheerz,

Yes we can supply some 410mm diameter rotors but are you making the hats to suit them and what thickness do you need ?

[ORSM-XT]

What do you recomend?

Cheerz,

[JOHNNOSF6]

Originally Posted by FLOORED

Yes we can supply some 410mm diameter rotors but are you making the hats to suit them and what thickness do you need ?

Dam what are those suckers worth

[FLOORED]

Originally Posted by ORSM-XT

What do you recomend?

Cheerz,

Are these for the BA ? Alcon,Brembo and AP Racing have calipers that you could use but a more realistic rotor size would be a 362mm to 380mm for the front as the rears would need to be 4 piston and we could maybe go for a 350mm set up there.Will your wheels allow this brake kit as it isn't the diameter but more the offset that will determine this.

[ORSM-XT]

Yeah they are for the BA, I think if im going for calipers they better be Brembo. The 362mm are slotted?? How much does it cost to get a set of 362mm rotors and Brembo Calipers with a set of pads.

Heres a pic of my wheels do you think it'll fit



Cheerz,

[JOHNNOSF6]

Originally Posted by JOHNNOSF6

Dam what are those suckers worth

Bump

[FLOORED]

They look like they might but if you ring the supplier and ask if they will fit the FPV cars with brembo's they should be able to tell you.
If you want Brembo's then I think the best thing is go for the brembo 6 piston front kit on 355mm rotors and run a 330mm rear 4 pot set up as well as we have that kit already made.This kit is between $5500 and $6000 depending different rotor and pad combination's.
We may be able to make a bigger rotors front and back with the Brembo's but it would be a custom kit and may run up closer to the $7000 to $7500 price.

[JOHNNOSF6]

What are the 410mm rotors worth by themselfs.

[FLOORED]

Originally Posted by JOHNNOSF6

What are the 410mm rotors worth by themselfs.

Just checked and the supplier has no stock at the moment and will not replace them unless he has a qty to do sorry.

[ORSM-XT]

Thanks for you help I'll let you know how I go

Cheerz,

[FLOORED]

No Worries - There is more chance with stock items like 355mm , 365,, and possibly 375mm front rotors if that helps.