Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Fiesta, Festiva and Ka

Reply
 
Thread Tools Display Modes
Old 19-02-2008, 04:12 PM   #1
AUTOCAD1
Starter Motor
 
Join Date: Mar 2007
Posts: 17
Default Wipers

I want to replace the wipers (just the rubber) on the wp fiesta. Are there any good aftermarket ones or should I just buy them from ford.
Also what size do I need to get?

thanks

AUTOCAD1 is offline   Reply With Quote Multi-Quote with this Post
Old 19-02-2008, 05:09 PM   #2
Adsy01
Regular Member
 
Adsy01's Avatar
 
Join Date: Dec 2006
Posts: 145
Default

They're 24" IIRC
I personally use any silcon type replacement, the rubber ones don't last long in the sun
They shouldn't cost anymore than $10 a pair from a department store, or even cheaper at a repco, bursons etc..
__________________
2004 Fiesta Zetec
Colorado Red

Elbach Lowered Coils - Rear sway bar - 12.5mm Axle Spacers - Rear disc brake conversion - 16" MP3 Rims
Tinted windows - Tinted Headlight surrounds - Clear side indicators- Phillips Xenon lighting - Colour Coded - ST Rear Spoiler - Smooth Rear Wiper - Ford leather gear knob & boot – Zetec S Sill Covers & Steering wheel - Leather centre armrest - Pioneer USB/CD player - JL Audio 4ch Amp, subwoofer & splits - Short aerial

The most "Standard" car I've ever owned!
Adsy01 is offline   Reply With Quote Multi-Quote with this Post
Old 19-02-2008, 06:12 PM   #3
melbzetec
Old enough to know better
 
melbzetec's Avatar
 
Join Date: Apr 2005
Location: Melbourne
Posts: 2,311
Default

A bit more than just the rubber, but check out Bosch Aeros Twins at Supercheap Auto.
Brilliant.
Whisper quiet and far more effective performance.
(Probably about $50 for the pair....but some guys I know say it's the best bang for buck mod they've made!)

http://www.bosch.com.au/content/lang...l/715_5615.htm
__________________
Manual 2003 Machine Silver 5 Door LR Focus Zetec.
Mods: Ford Racing CNC'd cylinder head milled .040", 3 angle valve grind. Ford Racing Stage II camshafts. Ford Racing cam gears. Ford Racing long tube header. Random Technology hi flow cat. Herrod 2.25" stainless cat-back. Pipercross Viper intake. CFM 65mm throttle body. 2000 ported intake manifold. Herrod Custom SCT tune. Eibach suspension. Quaife ATB diff. Wilwood 13" brakes. Custom ST170 leather interior.
www.cardomain.com/ride/2773918

melbzetec is offline   Reply With Quote Multi-Quote with this Post
Old 19-02-2008, 06:32 PM   #4
zetec jim
04 fiesta zetec
 
zetec jim's Avatar
 
Join Date: Jul 2007
Location: melbourne
Posts: 370
Default

Quote:
Originally Posted by melbzetec
A bit more than just the rubber, but check out Bosch Aeros Twins at Supercheap Auto.
Brilliant.
Whisper quiet and far more effective performance.
(Probably about $50 for the pair....but some guys I know say it's the best bang for buck mod they've made!)

http://www.bosch.com.au/content/lang...l/715_5615.htm

i'll second that, got some a little while ago, they are a lot quieter and look awesome! just look on the back and see if they fit an LR focus, mine worked fine. but just test one first to see compatibility. i think i got a 22" and a 16". just measure your existing ones with a tape and try and match em.
zetec jim is offline   Reply With Quote Multi-Quote with this Post
Old 19-02-2008, 07:11 PM   #5
Adsy01
Regular Member
 
Adsy01's Avatar
 
Join Date: Dec 2006
Posts: 145
Default

I was tempted to try these when i recently got my new wiper blades

Silicone blades work 100% effectively as they are designed to, and are whisper quiet... but the bosch ones do look pretty neat :
but other than looks i didn't think they were worth the extra cash IMO..($ x5 = : )



If you want a noisy blade try those twin ones... I unfortunately did once and they bloody whistled at speeds above 60KPH :togo: we live and learn i guess
__________________
2004 Fiesta Zetec
Colorado Red

Elbach Lowered Coils - Rear sway bar - 12.5mm Axle Spacers - Rear disc brake conversion - 16" MP3 Rims
Tinted windows - Tinted Headlight surrounds - Clear side indicators- Phillips Xenon lighting - Colour Coded - ST Rear Spoiler - Smooth Rear Wiper - Ford leather gear knob & boot – Zetec S Sill Covers & Steering wheel - Leather centre armrest - Pioneer USB/CD player - JL Audio 4ch Amp, subwoofer & splits - Short aerial

The most "Standard" car I've ever owned!
Adsy01 is offline   Reply With Quote Multi-Quote with this Post
Old 19-02-2008, 08:19 PM   #6
zetec jim
04 fiesta zetec
 
zetec jim's Avatar
 
Join Date: Jul 2007
Location: melbourne
Posts: 370
Default

Quote:
Originally Posted by zetec jim
i'll second that, got some a little while ago, they are a lot quieter and look awesome! just look on the back and see if they fit an LR focus, mine worked fine. but just test one first to see compatibility. i think i got a 22" and a 16". just measure your existing ones with a tape and try and match em.

EDIT: actually i bought the Aunger ones. little cheaper, look the same. but i haven't had any troubles with whistling over 60kmph. dunno how long they last though......
zetec jim is offline   Reply With Quote Multi-Quote with this Post
Old 19-02-2008, 09:56 PM   #7
melbzetec
Old enough to know better
 
melbzetec's Avatar
 
Join Date: Apr 2005
Location: Melbourne
Posts: 2,311
Default

I previously used silicone blades.......squealed like buggery
__________________
Manual 2003 Machine Silver 5 Door LR Focus Zetec.
Mods: Ford Racing CNC'd cylinder head milled .040", 3 angle valve grind. Ford Racing Stage II camshafts. Ford Racing cam gears. Ford Racing long tube header. Random Technology hi flow cat. Herrod 2.25" stainless cat-back. Pipercross Viper intake. CFM 65mm throttle body. 2000 ported intake manifold. Herrod Custom SCT tune. Eibach suspension. Quaife ATB diff. Wilwood 13" brakes. Custom ST170 leather interior.
www.cardomain.com/ride/2773918

melbzetec is offline   Reply With Quote Multi-Quote with this Post
Old 20-02-2008, 08:43 AM   #8
AUTOCAD1
Starter Motor
 
Join Date: Mar 2007
Posts: 17
Default

thanks for all your quick replies. I'll check them all out and let u know which ones I got in the end.
AUTOCAD1 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 06:37 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL