Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 18-06-2013, 10:35 AM   #1
Pepscobra
Call me dirt... Joe Dirt
 
Pepscobra's Avatar
 
Join Date: May 2009
Location: Back in Perth for good
Posts: 5,302
Default Holden to make major announcement to staff today

Just heard on the news that Holden has called a meeting with all staff and supplier representatives for later today... Any idea why?

The news report put a negative spin on it and mentioned Ford closure as a comparison.

Fingers crossed not bad news.

__________________
2007 BFII FPV Cobra Ute|Boss 302|6M|#23/100
Mods so far:
Billet Products Shifter|X-Force Exhaust|Herrod Oil Breathers|Whiteline Sway Bar|Tein SuperStreets|Kings FOR-303SL Rear Springs|Melling Oil Pump|Mace Manifold Spacers|Powerbond Underdrives|Pacemaker Headers|Ballistic Cats|XFT Custom Tune @ 308.3rwkw|DBA T3 Rotors|Ferodo Pads|Goodridge Braided Lines
Mods to come:
4.11 Diff Gears|Chromoly Tailshaft
I use & recommend:
Castrol|Motorcraft|Mainlube|Penrite


Check Out My Build Thread
Pepscobra is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 10:56 AM   #2
EDManual
FF.Com.Au Hardcore
 
EDManual's Avatar
 
Join Date: Mar 2005
Posts: 1,710
Default Re: Holden to make major announcement to staff today

hmm, could it be they join ford in a 2016 shutdown?
EDManual is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 11:05 AM   #3
ford71V8
FF.Com.Au Hardcore
 
ford71V8's Avatar
 
Join Date: Mar 2012
Posts: 5,137
Default Re: Holden to make major announcement to staff today

Someone told me yesterday that GM employees were being asked to accept a $200-300/wk paycut in order to "guarantee" their job for next decade

?
I have no idea how valid this comment is, but it was mentioned to me yesterday
ford71V8 is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 11:19 AM   #4
Dave R
Member
 
Join Date: Aug 2006
Posts: 4,940
Technical Contributor: For members who share their technical expertise. - Issue reason: Valued contributor especially in the FG threads. Offers help and information to all. Posts are always in a positive manner. 
Default Re: Holden to make major announcement to staff today

If it is just a paycut to staff, why are they calling in supplier reps?
Dave R is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 11:20 AM   #5
cobramania
FPV BFII GT Cobra No.249
 
cobramania's Avatar
 
Join Date: Dec 2007
Location: Lake Macquarie & Sydney
Posts: 581
Default Re: Holden to make major announcement to staff today

It's also rumoured Holden need at least 100 more workers to take redundancy to stay afloat.
If they don't get the more funding from the Government they're after, they'll go the way of Ford anyway.
cobramania is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 11:20 AM   #6
block58
FF.Com.Au Hardcore
 
block58's Avatar
 
Join Date: May 2009
Location: Victoria
Posts: 836
Default Re: Holden to make major announcement to staff today

My prediction:

-Commodore as we know it to finish in 2017
-All manufacturing will be with complete knock-down kits like the Cruze
-Very few Australian components, hence why they require the suppliers at the meeting
-Job cuts

Holden are committed to manufacturing in Australia, so this will not be a Ford-like announcement.
__________________
FG MkII G6 Ecoboost in Lightning Strike
block58 is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 11:31 AM   #7
madmelon
FF.Com.Au Hardcore
 
Join Date: Nov 2006
Location: Sydney
Posts: 1,334
Default Re: Holden to make major announcement to staff today

Quote:
Originally Posted by block58 View Post
My prediction:

-Commodore as we know it to finish in 2017
-All manufacturing will be with complete knock-down kits like the Cruze
-Very few Australian components, hence why they require the suppliers at the meeting
-Job cuts

Holden are committed to assembling in Australia, so this will not be a Ford-like announcement.
Fixed that for you...
madmelon is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 12:06 PM   #8
Gobes32
FF.Com.Au Hardcore
 
Gobes32's Avatar
 
Join Date: Mar 2006
Posts: 2,021
Default Re: Holden to make major announcement to staff today

Article here suggests it is just a run of the mill "state of the nation" meeting. And unions have come out and categorically denied pay cuts were on the table..........

http://www.victorharbortimes.com.au/...s-union/?cs=12
__________________
Quote:
Originally Posted by jpd80
A G8E would be good if Ford marketed squarely at Calais V8 owners. They need to bring back the walking fingers like in the initial FG ads, but this time have the fingers crushing Calais' as they walk along, with some relaxing background Led Zeppelin music and Marcos Ambrose in stubbies and singlet driving it.
Gobes32 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 18-06-2013, 12:13 PM   #9
Pepscobra
Call me dirt... Joe Dirt
 
Pepscobra's Avatar
 
Join Date: May 2009
Location: Back in Perth for good
Posts: 5,302
Default Re: Holden to make major announcement to staff today

Quote:
Originally Posted by Gobes32 View Post
Article here suggests it is just a run of the mill "state of the nation" meeting. And unions have come out and categorically denied pay cuts were on the table..........

http://www.victorharbortimes.com.au/...s-union/?cs=12
Thanks for that.

Are the Unions saying there will be no pay-cuts or that they will not accept a proposal of pay-cuts?
__________________
2007 BFII FPV Cobra Ute|Boss 302|6M|#23/100
Mods so far:
Billet Products Shifter|X-Force Exhaust|Herrod Oil Breathers|Whiteline Sway Bar|Tein SuperStreets|Kings FOR-303SL Rear Springs|Melling Oil Pump|Mace Manifold Spacers|Powerbond Underdrives|Pacemaker Headers|Ballistic Cats|XFT Custom Tune @ 308.3rwkw|DBA T3 Rotors|Ferodo Pads|Goodridge Braided Lines
Mods to come:
4.11 Diff Gears|Chromoly Tailshaft
I use & recommend:
Castrol|Motorcraft|Mainlube|Penrite


Check Out My Build Thread
Pepscobra is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 12:20 PM   #10
Gobes32
FF.Com.Au Hardcore
 
Gobes32's Avatar
 
Join Date: Mar 2006
Posts: 2,021
Default Re: Holden to make major announcement to staff today

Say's there will be no pay cuts, does not say that Holden didn't ask...... ;-)
__________________
Quote:
Originally Posted by jpd80
A G8E would be good if Ford marketed squarely at Calais V8 owners. They need to bring back the walking fingers like in the initial FG ads, but this time have the fingers crushing Calais' as they walk along, with some relaxing background Led Zeppelin music and Marcos Ambrose in stubbies and singlet driving it.
Gobes32 is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 12:42 PM   #11
pottery beige
FF.Com.Au Hardcore
 
Join Date: Jun 2009
Posts: 18,989
Default Re: Holden to make major announcement to staff today

way around pay cuts.. more work out of less people's....
pottery beige is online now   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 12:52 PM   #12
KIWI-1
FF.Com.Au Hardcore
 
Join Date: Jun 2012
Location: Victoria
Posts: 907
Default Re: Holden to make major announcement to staff today

Quote:
Originally Posted by block58 View Post
All manufacturing will be with complete knock-down kits like the Cruze
Didn't know they were CKD. If they go CKD only they will still be on borrowed time like NZ was in the 90s.
__________________
Fords the family have owned:
Model T, Model A, Fordson truck, 105E Anglias, MkI Escorts, MkI Cortinas, MkII Cortina, Zephyr Six, ZC Fairlane, AUII Ute manual, BA XT sedan, Territory TS SZ RWD.
KIWI-1 is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 01:25 PM   #13
Professor Farnsworth
Fossil fuel consumer
 
Professor Farnsworth's Avatar
 
Join Date: Jul 2005
Location: Mod For: Pub, Bar, Sales Yard, Show 'N Shine, Photoshop, AU to BF, FG to FGX, Territory & Sports Bar
Posts: 17,077
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Many years of valuable contributions to the forum, including some superb build threads. 
Default Re: Holden to make major announcement to staff today

announcement to be made at 2:45pm
__________________
2023 Superb Sportline - Steel Grey
2024 RS 3 Sedan - Mythos Black
2024 Mustang GT - Vapour Blue (built 31-10-2024 - waiting for ship)
Professor Farnsworth is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 01:36 PM   #14
Pepscobra
Call me dirt... Joe Dirt
 
Pepscobra's Avatar
 
Join Date: May 2009
Location: Back in Perth for good
Posts: 5,302
Default Re: Holden to make major announcement to staff today

Quote:
Originally Posted by pottery beige View Post
way around pay cuts.. more work out of less people's....
Very true unfortuneatly. I wish the unions could help the workers understand this. What's better? Some people lose their jobs? Or everyone keeps their jobs, but earns a bit less and the Company keeps going?

This happened to my company recently.
__________________
2007 BFII FPV Cobra Ute|Boss 302|6M|#23/100
Mods so far:
Billet Products Shifter|X-Force Exhaust|Herrod Oil Breathers|Whiteline Sway Bar|Tein SuperStreets|Kings FOR-303SL Rear Springs|Melling Oil Pump|Mace Manifold Spacers|Powerbond Underdrives|Pacemaker Headers|Ballistic Cats|XFT Custom Tune @ 308.3rwkw|DBA T3 Rotors|Ferodo Pads|Goodridge Braided Lines
Mods to come:
4.11 Diff Gears|Chromoly Tailshaft
I use & recommend:
Castrol|Motorcraft|Mainlube|Penrite


Check Out My Build Thread
Pepscobra is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 18-06-2013, 01:36 PM   #15
bobthebilda
FF.Com.Au Hardcore
 
Join Date: Feb 2010
Posts: 1,242
Default Re: Holden to make major announcement to staff today

Down Days? Decrease in Production rates? They only need to make 100 cruzes a day to meet current sales, which leaves 240 commodore derivatives a day from a daily production of 340. That approx. 4800 commodores / Utes / Caprices in a 20 day work month.
bobthebilda is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 01:40 PM   #16
neptune blue
FF.Com.Au Hardcore
 
neptune blue's Avatar
 
Join Date: Sep 2011
Location: Victoria
Posts: 2,182
Default Re: Holden to make major announcement to staff today

Hang on a minute didn't the AMWU state that the new EBA that was negotiated with Holden some 10 months ago was unprecedented in the industry and now they have to take a pay cut ???
neptune blue is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 02:19 PM   #17
turbodewd
FG Falcon fan
 
turbodewd's Avatar
 
Join Date: Apr 2008
Location: Canberra, ACT
Posts: 913
Default Re: Holden to make major announcement to staff today

Thats a pretty big paycut!

Ultimately the demise of the AU auto industry was caused by the GFC. the US and Euro economies have tanked. Ours remained resilient due to China and our dollar remained high.

Our wages are just too high compared to europe and the US...
turbodewd is offline   Reply With Quote Multi-Quote with this Post
4 users like this post:
Old 18-06-2013, 02:22 PM   #18
Pepscobra
Call me dirt... Joe Dirt
 
Pepscobra's Avatar
 
Join Date: May 2009
Location: Back in Perth for good
Posts: 5,302
Default Re: Holden to make major announcement to staff today

Quote:
Originally Posted by turbodewd View Post
Ultimately the demise of the AU auto industry was caused by the GFC. the US and Euro economies have tanked. Ours remained resilient due to China and our dollar remained high.

Our wages are just too high compared to europe and the US...
not a bad summary, I would tend to agree.
__________________
2007 BFII FPV Cobra Ute|Boss 302|6M|#23/100
Mods so far:
Billet Products Shifter|X-Force Exhaust|Herrod Oil Breathers|Whiteline Sway Bar|Tein SuperStreets|Kings FOR-303SL Rear Springs|Melling Oil Pump|Mace Manifold Spacers|Powerbond Underdrives|Pacemaker Headers|Ballistic Cats|XFT Custom Tune @ 308.3rwkw|DBA T3 Rotors|Ferodo Pads|Goodridge Braided Lines
Mods to come:
4.11 Diff Gears|Chromoly Tailshaft
I use & recommend:
Castrol|Motorcraft|Mainlube|Penrite


Check Out My Build Thread
Pepscobra is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 02:28 PM   #19
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,704
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default Re: Holden to make major announcement to staff today

Quote:
Originally Posted by KIWI-1 View Post
Didn't know they were CKD. If they go CKD only they will still be on borrowed time like NZ was in the 90s.
Most of Oz doesn't know that! You ask most people, and they tell you that the Cruze is made here. And it is, but not really - it's just assembled.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 18-06-2013, 02:39 PM   #20
Rodge
Banned
 
Rodge's Avatar
 
Join Date: Feb 2010
Posts: 5,801
Default Re: Holden to make major announcement to staff today

Who's next Toy Otter ?
Rodge is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 18-06-2013, 02:40 PM   #21
nstg8a
3..2..1..
 
nstg8a's Avatar
 
Join Date: Nov 2009
Location: Bellbird park
Posts: 7,218
Default Re: Holden to make major announcement to staff today

Quote:
Originally Posted by JC View Post
Most of Oz doesn't know that! You ask most people, and they tell you that the Cruze is made here. And it is, but not really - it's just assembled.
And half of them think anything else with a holden badge is made here too
__________________
Quote:
Originally Posted by pottery beige View Post
Happy mcgadget meal orphan mcboofhead
nstg8a is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 02:42 PM   #22
bobthebilda
FF.Com.Au Hardcore
 
Join Date: Feb 2010
Posts: 1,242
Default Re: Holden to make major announcement to staff today

Quote:
Originally Posted by JC View Post
Most of Oz doesn't know that! You ask most people, and they tell you that the Cruze is made here. And it is, but not really - it's just assembled.
And Holden word it accordingly. To be called "Made in Australia", i think by definition more than 50% of it has to be done here, but Holden say the Cruze is "built" in Australia. They would be taken to court by the ACCC if they were to use "Made in Australia" for the Cruze.
bobthebilda is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 18-06-2013, 02:49 PM   #23
Pepscobra
Call me dirt... Joe Dirt
 
Pepscobra's Avatar
 
Join Date: May 2009
Location: Back in Perth for good
Posts: 5,302
Default Re: Holden to make major announcement to staff today

Has announcement been made yet?
__________________
2007 BFII FPV Cobra Ute|Boss 302|6M|#23/100
Mods so far:
Billet Products Shifter|X-Force Exhaust|Herrod Oil Breathers|Whiteline Sway Bar|Tein SuperStreets|Kings FOR-303SL Rear Springs|Melling Oil Pump|Mace Manifold Spacers|Powerbond Underdrives|Pacemaker Headers|Ballistic Cats|XFT Custom Tune @ 308.3rwkw|DBA T3 Rotors|Ferodo Pads|Goodridge Braided Lines
Mods to come:
4.11 Diff Gears|Chromoly Tailshaft
I use & recommend:
Castrol|Motorcraft|Mainlube|Penrite


Check Out My Build Thread
Pepscobra is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 02:51 PM   #24
block58
FF.Com.Au Hardcore
 
block58's Avatar
 
Join Date: May 2009
Location: Victoria
Posts: 836
Default Re: Holden to make major announcement to staff today

Quote:
Originally Posted by Pepscobra View Post
Has announcement been made yet?
I think so

http://www.news.com.au/business/hold...-1226665581042
__________________
FG MkII G6 Ecoboost in Lightning Strike
block58 is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 02:55 PM   #25
nstg8a
3..2..1..
 
nstg8a's Avatar
 
Join Date: Nov 2009
Location: Bellbird park
Posts: 7,218
Default Re: Holden to make major announcement to staff today

Just looks like more jd dribble that hes been sPruiking for the last week?
__________________
Quote:
Originally Posted by pottery beige View Post
Happy mcgadget meal orphan mcboofhead
nstg8a is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 03:05 PM   #26
dallasv8
5.8 litres of fun
 
dallasv8's Avatar
 
Join Date: Oct 2005
Location: Cobar
Posts: 562
Default Re: Holden to make major announcement to staff today

5 to 7 bucks an hour is a large pay cut.some people will go backwards financially with a pay cut like that,possible lose houses and cars etc.
should the government make holden cut back sponsership of things like nrl etc to try and focus on their business ?
to me its just seems like all they want is to secure funding before the coalition get in power instead of focusing on their own business.
__________________
2003 RTV
2015 Ranger XLS mk2
dallasv8 is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 03:11 PM   #27
olds
FF.Com.Au Hardcore
 
Join Date: Feb 2008
Posts: 513
Default Re: Holden to make major announcement to staff today

Watch this snowball to other industries if this gets up . Hang on I think my boss is calling a meeting now !
olds is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 18-06-2013, 03:21 PM   #28
Gobes32
FF.Com.Au Hardcore
 
Gobes32's Avatar
 
Join Date: Mar 2006
Posts: 2,021
Default Re: Holden to make major announcement to staff today

As a member of Gen Y, it upsets me no end that not only did we cop house prices that were rising at astronomical rates, but we also become the first generation to go backwards in terms of jobs and remuneration.
__________________
Quote:
Originally Posted by jpd80
A G8E would be good if Ford marketed squarely at Calais V8 owners. They need to bring back the walking fingers like in the initial FG ads, but this time have the fingers crushing Calais' as they walk along, with some relaxing background Led Zeppelin music and Marcos Ambrose in stubbies and singlet driving it.
Gobes32 is offline   Reply With Quote Multi-Quote with this Post
Old 18-06-2013, 03:21 PM   #29
Wretched
Render unto Caesar
 
Wretched's Avatar
 
Join Date: Feb 2008
Location: ::1
Posts: 4,234
Default Re: Holden to make major announcement to staff today

more info here

Quote:
Holden chairman and managing director Mike Devereux says Holden will have to slash its labour costs in order to keep operating in Australia.

Devereux says Holden must make “significant labour related annual cost savings” and that “employees will be presented with a very difficult decision”

Speaking at a media conference this afternoon Devereux said current wage levels were not sustainable if the car maker is to continue producing the Commodore and Cruze until at least 2022.

“Our manufacturing costs are simply too high,” he says.
Advertisement

“We’re talking to people about achieving labour-related savings in our costs per car.

“We can’t continue to make cars in Australia if we’re not competitive and can’t reduce those costs.”

The news comes just weeks after workers began producing the much-hyped VF Commodore, which Holden says is a make or break model for the company that last month posted a $153 million loss.

It also comes just weeks after Ford confirmed it would close the doors of its Broadmeadows production line in 2016, ending 88 years of local vehicle production.

The automotive industry has been in turmoil for the last few years, battling cheaper imports due to lower import tariffs and a strong Australian dollar.

That strong dollar has also eroded once lucrative export markets, reducing local vehicle production to record lows.

Holden’s Devereux – who has conditionally committed to producing at least two new models until 2022 - has said numerous times that unless the government continues to provide generous financial incentives to manufacture cars locally then Holden could pull out as early as 2016.

Sales of locally produced cars have been in freefall for more than a decade, led by an exodus from the large car that was once the choice of fleets and families.

Last year just 12.6 per cent of the 1.1 million new cars sold were built locally. In 2002 almost one-third of the new cars sold here were produced locally.

Key to the drop in sales have been booming SUV sales, with all but the Ford Territory imported.
http://theage.drive.com.au/motor-new...618-2offz.html

not a JD article either
__________________
"Aliens might be surprised to learn that in a cosmos with limitless starlight, humans kill for energy sources buried in sand." - Neil deGrasse Tyson
Wretched is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 18-06-2013, 03:22 PM   #30
Alan D Segal
Call me 'Al'
 
Join Date: Feb 2013
Location: On a flattened-out cardboard box out the back behind the wheelie bins.
Posts: 940
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Good contributor. 
Default Re: Holden to make major announcement to staff today

EDIT: Was going to say something about Dowling's article as posted by another member, but the thread moved on since I finished. Apologies for any inconvenience.

Last edited by Alan D Segal; 18-06-2013 at 03:24 PM. Reason: Irrelevant now
Alan D Segal is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 08:57 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL