Ford Focus RS $50,990 July 2016 - Page 2

XP6 · 31-10-2015, 09:27 PM

Even the 1st gen foci was a porker for the size of the car

Craig@AUDI · 02-11-2015, 01:16 PM

Just sold my third one today, friggen hotcakes these things!

b0son · 02-11-2015, 04:01 PM

I suspect this thing is going to be far more a halo model than the mustang

MAGPIE · 02-11-2015, 04:18 PM

Quote:

Originally Posted by b0son

I suspect this thing is going to be far more a halo model than the mustang

The Mustang halo model is the GT350 and it ain't coming down under so hardly comparable.

Kable72 · 02-11-2015, 04:25 PM

Quote:

Originally Posted by Craig@Rockdale

Just sold my third one today, friggen hotcakes these things!

So, uhh. Can we arrange an obligation free test drive?

Craig@AUDI · 02-11-2015, 08:27 PM

Quote:

Originally Posted by Kable72

So, uhh. Can we arrange an obligation free test drive?

Yep I'll get the Playstation ready for you!

Cheech · 03-11-2015, 10:53 PM

Just bought one - now the agonizing wait begins.

Anyone want a well looked after XRT ?

Top_Ghia · 04-11-2015, 08:37 AM

Quote:

Originally Posted by Cheech

Anyone want a well looked after XRT ?

Yep. How much and where are you located?

Bossxr8 · 04-11-2015, 11:32 AM

First reviews are in, some journos got driven around with Ford engineers overseas. They have said it does not understeer and when it is in drift mode it behaves just like a RWD car. They say they have fixed the usual AWD issues in the RS.

vztrt · 04-11-2015, 01:34 PM

Quote:

Originally Posted by CSV_LS1

You raise a good point. But 1575kg is hefty. To give a better idea, a ecoboost mustang weighs 20kg more.

So the stang has AWD?

CSV_LS1 · 04-11-2015, 07:53 PM

Quote:

Originally Posted by vztrt

So the stang has AWD?

You would have a point if the mustang wasn't 400mm longer and 100mm wider. It gives an idea how much heavier it is in its own class.

vztrt · 05-11-2015, 08:02 AM

Quote:

Originally Posted by CSV_LS1

You would have a point if the mustang wasn't 400mm longer and 100mm wider. It gives an idea how much heavier it is in its own class.

Safety, Rigid frame, tech, lots of power for the price means there's a downside. I'm sure they could have made it AMG A45 money and knocked off 100kg.

Bossxr8 · 05-11-2015, 01:58 PM

Hopefully they do an RS500 version like they did with the last one, and it actually comes here this time.

Wretched · 05-11-2015, 02:07 PM

Quote:

Originally Posted by Bossxr8

Hopefully they do an RS500 version like they did with the last one, and it actually comes here this time.

In that sinister matte black too.

outback_ute · 05-11-2015, 03:18 PM

Quote:

Originally Posted by vztrt

Safety, Rigid frame, tech, lots of power for the price means there's a downside. I'm sure they could have made it AMG A45 money and knocked off 100kg.

Isn't the A45 only about 20kg lighter than the RS?

Another thought - $50,990 looks like a better deal than the Mustang, when compared to the USA pricing.

vztrt · 05-11-2015, 03:21 PM

Quote:

Originally Posted by outback_ute

Isn't the A45 only about 20kg lighter than the RS?

1480kg from what I read. Could be wrong.

Big_Daz · 06-11-2015, 09:09 AM

I have seen in some places that the RS might be a limited edition thing.. Is this going to be the case? Or will it be a case of they will build as many as they can sell?

Bossxr8 · 06-11-2015, 10:00 AM

As many as they can sell.

I was just reading an article about it and the Ford engineers started off using rear diff bits from an Evoque, but after smashing them to pieces due to the torque loads they just built their own.

Kable72 · 06-11-2015, 10:42 AM

It would be dumb to knock people back on what should be the hottest hatch of the year.

Cheech · 06-11-2015, 11:27 AM

Here's the problem on supply.....

There is only one plant that makes them - Saarlouis Germany.
Its a global car which, whilst not limited like the RS MKII, will be limited in how many we can get.
Australia is a small market and I recall one of the dealers theorizing that we may only get a few hundred in the full first year of production.
Essentially its the same supply problem that Ford have had with Wildtrack & Mustang.

My dealer said they won't even get a floor demonstrator model as they expect all first shipment models to be pre-sold (this possibly sounds like BS)

They mentioned that further manufacturing will be done to order.

I put down a deposit a few days ago to guarantee a car in the first shipment.

Big_Daz · 06-11-2015, 01:36 PM

Quote:

Originally Posted by Kable72

It would be dumb to knock people back on what should be the hottest hatch of the year.

That's what I thought, this thing is meant to be the new thing and people seem to be buying this type of car....

Figured when I heard from other sources it was only going to be a limited thing I had to check it out on here...

If the thing wasn't too small for me I'd be looking at one instead of the new SS/XR8 type cars...

vztrt · 06-11-2015, 01:53 PM

Quote:

Originally Posted by Big_Daz

If the thing wasn't too small for me I'd be looking at one instead of the new SS/XR8 type cars...

Unless you seriously need rear leg room. I'm actually surprised about the space.

Mind you the boot may suffer now with AWD.

Wretched · 06-11-2015, 01:59 PM

Quote:

Originally Posted by vztrt

Unless you seriously need rear leg room. I'm actually surprised about the space.

Mind you the boot may suffer now with AWD.

Boot suffered in the previous one due to exhaust. Lost a bit of space.
The RS I believe even missed out on a space saver and had only the repair kit/goo.

vztrt · 06-11-2015, 02:07 PM

Quote:

Originally Posted by Wretched

Boot suffered in the previous one due to exhaust. Lost a bit of space.
The RS I believe even missed out on a space saver and had only the repair kit/goo.

So I would say rear space (not really what you would buy this car for I know) would suffer then. There would probably be a new floor stamping for this car.

Wretched · 06-11-2015, 02:10 PM

Quote:

Originally Posted by vztrt

So I would say rear space (not really what you would buy this car for I know) would suffer then. There would probably be a new floor stamping for this car.

I think you might be right, that could be the reason behind the build in another factory to the run of the mill Focus.

vztrt · 06-11-2015, 02:14 PM

Quote:

Originally Posted by Wretched

I think you might be right, that could be the reason behind the build in another factory to the run of the mill Focus.

Could, or a capacity problem....seeing its world wide car.

Its good. German built, quick and manual. What more do you want?

Wretched · 06-11-2015, 02:14 PM

Quote:

Originally Posted by vztrt

Could, or a capacity problem....seeing its world wide car.

Its good. German built, quick and manual. What more do you want?

Agreed, hence why I won't let go of my XR5..

Bossxr8 · 06-11-2015, 02:28 PM

Quote:

Originally Posted by Wretched

I think you might be right, that could be the reason behind the build in another factory to the run of the mill Focus.

Its built on the same line as other Saarlouis Focus's. The first prototype's were actually run down the line as ST's and converted to RS spec in the pilot plant, so no different sheet metal.

Watch the rebirth of a legend vids on Youtube.

b0son · 06-11-2015, 03:02 PM

Quote:

Originally Posted by vztrt

What more do you want?

Availability

MITCHAY · 07-11-2015, 12:49 AM

Quote:

Originally Posted by b0son

Availability

Seems like a common problem with Ford. Doesn't matter how good they are if you can't supply.

Lucky for me I can ride out the initial deliveries. I want a Focus RS but you can get farked if you think I will wait months on end for it.

I will wait for a Ferrari, not a bogstock Ford.