Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 13-07-2006, 08:41 PM   #1
AUIIIXR8
Formerly AU2XLSV8
 
AUIIIXR8's Avatar
 
Join Date: Dec 2004
Location: Sunshine Coast
Posts: 694
Default

Rough guesses:
Assuming it's a 6 120-160rwkw
Assuming it's an 8 130-170rwkw

If it's an 8 your heads will hold you back.

Wrong section to ask mate
__________________
Current ride = Mazda 6 MPS
Toy = AU2XLSV8 - another one
(really my best mates but I'm claiming it)

Past
EL 6 S/C - sold
AUII XLS V8 Stroker - sold
99' Laser (runabout) - sold
BA Fairmont - sold
AU III XR8 220 - sold (so should have kept this one)
AU III XLS Tickford 6 - sold


Formerly AU2XLSV8
AUIIIXR8 is offline   Reply With Quote Multi-Quote with this Post
Old 13-07-2006, 08:41 PM   #2
351ciofgrunt
Go Hard or Go Home
 
Join Date: Jan 2006
Location: Toowoomba, Queensland
Posts: 417
Default

Quote:
Originally Posted by Blake_7
im buying a eb f/mont ghia.. has the following mods


exhaust
extractors
cam
pod
chip

wat sorta power ball park would that produce...

would need more info than that...as in exhaust? describe it
cam? we all got cams... what are your specs?
351ciofgrunt is offline   Reply With Quote Multi-Quote with this Post
Old 13-07-2006, 08:54 PM   #3
351ciofgrunt
Go Hard or Go Home
 
Join Date: Jan 2006
Location: Toowoomba, Queensland
Posts: 417
Default

With buying an EB falcon always make sure its a series 2, these were built after april 1992

the series 2 has the 4.0litre that has alot more power than the series 1 which had the 3.9litre

if its the series II 4.0litre and you like the way it goes, then i say buy it...


power might be around 160-170kw, if its the series II 4.0litre
351ciofgrunt is offline   Reply With Quote Multi-Quote with this Post
Old 13-07-2006, 11:41 PM   #4
charles_wif_xf
Purveyor of filth
 
Join Date: Oct 2005
Location: Melbourne
Posts: 2,958
Default

Go get a dyno run and stop guessing. It will cost you $80 at most places that have 'em.
charles_wif_xf is offline   Reply With Quote Multi-Quote with this Post
Old 14-07-2006, 12:25 AM   #5
XRated
Shoot.
 
XRated's Avatar
 
Join Date: Jan 2005
Location: Melbourne
Posts: 4,909
Default

There isn't much difference power-wise between the 3.9L MPFi and the 4.0LMPFi. I'd be tipping between 130 and 145 with the mods listed and depending on the cam. Manual certainly makes the ol' E-Series fly, and with a shorter diff it should really hammer off the line!
__________________


20V Turbo

XRated is offline   Reply With Quote Multi-Quote with this Post
Old 14-07-2006, 05:58 AM   #6
hrtrip
I Hope Holden Dies
 
hrtrip's Avatar
 
Join Date: Jun 2005
Location: Eastern 'Burbs, Melbourne
Posts: 184
Default

buy it - i wish i had a manual
__________________
HRT R.I.P

Icon Blue BFII Fairmont
Stock as a rock... :(
hrtrip is offline   Reply With Quote Multi-Quote with this Post
Old 14-07-2006, 06:16 AM   #7
351ciofgrunt
Go Hard or Go Home
 
Join Date: Jan 2006
Location: Toowoomba, Queensland
Posts: 417
Default

Quote:
Originally Posted by XRated
There isn't much difference power-wise between the 3.9L MPFi and the 4.0LMPFi. I'd be tipping between 130 and 145 with the mods listed and depending on the cam. Manual certainly makes the ol' E-Series fly, and with a shorter diff it should really hammer off the line!

There is a big difference between the 3.9 and the 4.0...
six cylinder engines available for the EB:

3.9 120kw
3.9 139kw

4.0 148kw (series II)
4.0 161kw (series II XR6)

assuming its a 4.0 litre then with the mods described you should be at least at the XR6 level of output of 161kw

make sure its a series II!!
351ciofgrunt is offline   Reply With Quote Multi-Quote with this Post
Old 14-07-2006, 12:13 PM   #8
XRated
Shoot.
 
XRated's Avatar
 
Join Date: Jan 2005
Location: Melbourne
Posts: 4,909
Default

Quote:
Originally Posted by 351ciofgrunt
There is a big difference between the 3.9 and the 4.0...
six cylinder engines available for the EB:

3.9 120kw
3.9 139kw

4.0 148kw (series II)
Umm, no, there isn't.

The 3.9L with 120kw you refer to is only in CFi EAs and EBs. However, there was an option to have MPFi on both models (standard on Ghias) that boosted power to 139kws. Obviously the EBII and ED did not get CFi (thank God!) and came standard with 148kw (slightly different bore to the 3.9L). The 9kw difference is not much considering that the car is a bit lighter than later model EBs and EDs.
__________________


20V Turbo

XRated is offline   Reply With Quote Multi-Quote with this Post
Old 14-07-2006, 12:20 PM   #9
351ciofgrunt
Go Hard or Go Home
 
Join Date: Jan 2006
Location: Toowoomba, Queensland
Posts: 417
Default

Quote:
Originally Posted by XRated
Umm, no, there isn't.

The 3.9L with 120kw you refer to is only in CFi EAs and EBs. However, there was an option to have MPFi on both models (standard on Ghias) that boosted power to 139kws. Obviously the EBII and ED did not get CFi (thank God!) and came standard with 148kw (slightly different bore to the 3.9L). The 9kw difference is not much considering that the car is a bit lighter than later model EBs and EDs.



so do you have a problem with me advising to make sure its a 4.0 litre? 9 kw would still be noticeable...

why are you so defensive about the 3.9?
351ciofgrunt is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 06:43 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL