Price Please

[JOHNNOSF6]

I know the brembo calipers are rebuildable, what would you charge to strip then reassemble a set of calipers labour wise.

Also following from the other thread, 410mm rotors. What do they want usually charge for hese and how long till they have more stock.

[JOHNNOSF6]

bum p

[FLOORED]

Originally Posted by JOHNNOSF6

I know the brembo calipers are rebuildable, what would you charge to strip then reassemble a set of calipers labour wise.

Also following from the other thread, 410mm rotors. What do they want usually charge for hese and how long till they have more stock.

Sorry about that .
Depending on the condition of the calipers and whether they are 4 or 6 piston it is generally anywhere from $50 to $100 per caliper in labour.The seals and boots are extra and are usually about $20 each per item.We do not paint them though and best to leave for a couple of days as it is not a big part of what i do here and would have to make time thanks.
I am waiting on a P/A for the 410mm rotors thanks.

[JOHNNOSF6]

Originally Posted by FLOORED

Sorry about that .
Depending on the condition of the calipers and whether they are 4 or 6 piston it is generally anywhere from $50 to $100 per caliper in labour.The seals and boots are extra and are usually about $20 each per item.We do not paint them though and best to leave for a couple of days as it is not a big part of what i do here and would have to make time thanks.
I am waiting on a P/A for the 410mm rotors thanks.

Ok cool, thanks for the info. They are actually 8 piston calipers, not sure what they are off but they are big suckers and there cheap to. They look rough as hell but they appear new or near new on closer inspection. I just wnat to get them repainted before i use them.

[FLOORED]

Originally Posted by JOHNNOSF6

Ok cool, thanks for the info. They are actually 8 piston calipers, not sure what they are off but they are big suckers and there cheap to. They look rough as hell but they appear new or near new on closer inspection. I just wnat to get them repainted before i use them.

I would have to get piston sizes from you to confirm.The rotors are available in 380mm x 32mm from $350 each.The 410mm rotors are to take a 36mm thick disc.