Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 06-06-2006, 09:44 PM   #241
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default

Not "everything" is covered under a 2nd hand dealer warranty.

If it was a New car warranty ... yeah it should be warrantable ... but not to the end of the new car warranty ... it usually is a small period like 3 months.
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 06-06-2006, 09:50 PM   #242
goXF
Now AU powered
 
goXF's Avatar
 
Join Date: May 2005
Location: Neilborough
Posts: 215
Default

what if it was like that at the start - when he bought it secondhand? Would they just say that that is how he bought it - with bad shockers.?
__________________
First car: 1987 XF Falcon 'S' sedan, 82,000Km - 134,000Km

Current Car: 2002 AU3 Falcon Forte sedan, 51,000Km when purchased - NOW: 81,000Km.
goXF is offline   Reply With Quote Multi-Quote with this Post
Old 08-06-2006, 10:28 AM   #243
bazz
Melbourne Lad
 
Join Date: May 2006
Posts: 80
Default

speaking of which. My car came with a roadworthy certificate which doesn't expire for another three weeks. Can the road worthy certificate issuer be accountable for any of these faults?

I also found a fault with the LPG tank, when parked on a slope (upwards) the fuel guage will read completely empty and it takes alot of cranking for the engine to start.
bazz is offline   Reply With Quote Multi-Quote with this Post
Old 08-06-2006, 10:35 AM   #244
StevenAu2
Irregular Member
 
Join Date: Sep 2005
Posts: 199
Default

Quote:
Originally Posted by bazz
Problems with my 2002 AU-III Wagon:

1) Stereo is crap, can't even play my burnt CD's when even a 15y.o OEM Subaru unit works. Not sure if it's able to play CD's at all, it keep spitting them out.

2) LPG sender guage goes awol sometimes, before returning to an accurate reading.

3) Slow power windows.

4) The fans are noisey when activated, e.g with heather or aircon on. It makes a clicking sound like the big wheel at the casino.

But when I think of the cheap running cost of LPG, I feel happy again.
Acouple are easy fixed,ditch the stereo for a new one,most of the guys here have had probs with the ford deck spitting out burnt discs,there was a thread a while back.
And Take off your door trims and spray the rubbers where the windows slide with Mr Sheen.
StevenAu2 is offline   Reply With Quote Multi-Quote with this Post
Old 08-06-2006, 10:49 AM   #245
bazz
Melbourne Lad
 
Join Date: May 2006
Posts: 80
Default

Quote:
Originally Posted by StevenAu2
Acouple are easy fixed,ditch the stereo for a new one,most of the guys here have had probs with the ford deck spitting out burnt discs,there was a thread a while back.
And Take off your door trims and spray the rubbers where the windows slide with Mr Sheen.
I'll source a new stereo soon, but I don't like double din - why the heck did the OEM headunit have to be double-din!

However, I fixed the slow window problem yesterday, took the trims off, cleaned the rubber seals with some Methylated spirits to rid of all the dirt/dust that built up over the years. Then I sprayed a generous amount of Nulon ezi glide clear silicon on every part which makes contact with the window - that stuff is so slippery is invisible when dry. I recomend it to anyone. Also took the opportunity to spray all the hinges, struts, touching metal pieces around the car. http://www.nulon.com.au/products.php?productId=ezi330

The window goes up and down much easier now. It's like new again :


Cheers,
bazz is offline   Reply With Quote Multi-Quote with this Post
Old 08-06-2006, 11:05 AM   #246
StevenAu2
Irregular Member
 
Join Date: Sep 2005
Posts: 199
Default

Cool i might get some of that stuff sounds good.
StevenAu2 is offline   Reply With Quote Multi-Quote with this Post
Old 08-06-2006, 11:15 AM   #247
bazz
Melbourne Lad
 
Join Date: May 2006
Posts: 80
Default

The Nulon silicon spray is $12 at Supacheap Auto, but their 20% storewide stocktake sale is happening soon, so might as well wait so you can purchase other items like oil, filter ect to make it a worthwhile trip.

On another topic, my Au3 front grill had alot of chips and weather wear. I bought a can of gun metal spraypaint and gave it a few layers - comes out just like new again. Very effective and cheap fix to improve the aesthetic of the car.

Those with a badly weathered front grill will know what I mean.
bazz is offline   Reply With Quote Multi-Quote with this Post
Old 27-06-2006, 04:58 PM   #248
Dark Horse
_Oo===oO_
 
Dark Horse's Avatar
 
Join Date: Dec 2004
Location: Canberra
Posts: 1,471
Default

Quote:
Originally Posted by useless
Well the new second hand box went in last week.Apparently if the rear auto seal goes the tailshaft may thrash around causing bad wearing inside the main gearbox housing.
Yes and at 111,000 k's the rear seal on mine decides it's time to pull up stumps. Slight oil leak is noted in garage, and slightly louder than normal driveline noise noted whilst motoring.

New seal, filter and gasket for a service, BTR box is examined to be in pretty good nick and we're away _Oo===oO_.
__________________
COURAGE - ENDURANCE - MATESHIP - SACRIFICE
Dark Horse is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 25-07-2006, 09:51 PM   #249
SLYXT
FG xr6 Ute.
 
SLYXT's Avatar
 
Join Date: Jul 2006
Location: South Coast
Posts: 232
Default

Quote:
Originally Posted by sbutler
I had a ripper one day! the left window wouldn't work it was stuck down, so I rang FTe service and the guy said, "get this" press the window switch up & down 31 yes 31 times, that will fix it!!! yeah right :tosser1: anyway I did this, and bugger me on the 31st time the bloody thing worked!! : Beats the hell outta me. I dont know if anyone else has had this..
LMFAO, you just had me out there in the dark freezing my balls off trying that lol.. didnt work by the way lol..
the passenger side down switch is working when it wants on mine.
:(
SLYXT is offline   Reply With Quote Multi-Quote with this Post
Old 25-07-2006, 09:55 PM   #250
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default

If it's a case of working sometimes and not others .. clean the contacts on the underside of the switch ... this will most likely fix the problem.

And yes the 31 presses apparently resets the window motor/regulator and it will work again ... but that's in some strange cases.
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 26-07-2006, 11:50 AM   #251
relish
Starter Motor
 
Join Date: Jul 2006
Posts: 2
Unhappy Boot leak

Hi everyone please help me,

I have looked over this forum and cant find anyone else with problem as of yet. I have a Ford AU II Forte its done 170,000 kms and still runs (touch wood) awesome, always been serviced etc etc.

However for a while now there has been a terrible boot leak. I have no idea what to do because the only thing people have suguested to me is the spoiler. Funny thing is that i do not have a spoiler. People have also suguested the licence plate, well first of all the water is running from the top of the inside of boot down, not up, but anyways i made those screws as tight as they could go.

Nothing works. Everytime its rains my boot is full of water, but not under the parcel shelf, only where the spare wheel is. Everytime i open the boot the top of the boot is drenched and its starting to rust. Obviously there is no way of testing this.

Has anyone heard or had this problem themselves, its driving me insane and the boot stinks of wet carpet.....everyone knows how bad that smells. Please help.

Luke
relish is offline   Reply With Quote Multi-Quote with this Post
Old 30-07-2006, 02:31 PM   #252
fairmont au
fairmont ghia au 2 wagon
 
Join Date: Jul 2006
Posts: 37
Smile ford au2 fairmont ghia wagon

hi, i have had au2 fairmont ghia wagon, yes wagon for 2 or 3 years we have had a few problems with it:
1. fuel sender
2. 6 stacker in dash repladed through ford 6 month warrenty as soon as it ended it died again.
3. window switches.
4. recall for steering.
5. lcd dash

after all this it has got us from point a to b each time goes to sydney 8 hours to there every 3 months and armidale an hour away each weekend.
we had i lowerd didnt by the springs moved the mount up and a nice noted exhaust I LOVE THIS CAR

1st question does any one know how to make all the dash lights blue?
fairmont au is offline   Reply With Quote Multi-Quote with this Post
Old 30-07-2006, 02:35 PM   #253
jonbays
TL40 Wagon?
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
Default

I have an AUII fairmont wagon too (not a Ghia though as Ford didn't make one?) and yes all the same problems exactly.
My 6 stacker is still going well now but no I don't trust it and very careful loading CD's into it now.

Quote:
Originally Posted by fairmont au
hi, i have had au2 fairmont ghia wagon, yes wagon for 2 or 3 years we have had a few problems with it:
1. fuel sender
2. 6 stacker in dash repladed through ford 6 month warrenty as soon as it ended it died again.
3. window switches.
4. recall for steering.
5. lcd dash

after all this it has got us from point a to b each time goes to sydney 8 hours to there every 3 months and armidale an hour away each weekend.
we had i lowerd didnt by the springs moved the mount up and a nice noted exhaust I LOVE THIS CAR
jonbays is offline   Reply With Quote Multi-Quote with this Post
Old 30-07-2006, 03:31 PM   #254
fairmont au
fairmont ghia au 2 wagon
 
Join Date: Jul 2006
Posts: 37
Default

Quote:
Originally Posted by jonbays
I have an AUII fairmont wagon too (not a Ghia though as Ford didn't make one?) and yes all the same problems exactly.
My 6 stacker is still going well now but no I don't trust it and very careful loading CD's into it now.
our fairmont was made a ghia cause the bloke that owned it before us like the ghia more so had the intieror made ghia
fairmont au is offline   Reply With Quote Multi-Quote with this Post
Old 12-08-2006, 01:33 PM   #255
AU2_XR8_220
Regular Member
 
Join Date: Jun 2006
Location: Perth, WA
Posts: 45
Default Boot leak

Gday Luke,

Unfortunately theres not much you can do about the boot leak (except replace the rubbers/ensure they are in good nic, and park the car so that the nose is facing uphill).

It's a common problem found in both late model commodores and falcons. Water builds up in the boot gutters, overflows the rubber seal, and trickles into the boot. The seal between underside of the boot and rubber trim is poor.

I own a AU2 XR8, and every time it rains, approx 1 inch of water gathers in the spare wheel well. Its a pain in the ****, but something ya gotta live with.

To allow the boot to drain and to prevent a build up of water in the wheel well, you could drill a couple of small holes through the well. I you are going to do this, proceed with caution!! Dont miss and hit the fuel tank!!

cheers,
Bernie :

Quote:
Originally Posted by relish
Hi everyone please help me,

I have looked over this forum and cant find anyone else with problem as of yet. I have a Ford AU II Forte its done 170,000 kms and still runs (touch wood) awesome, always been serviced etc etc.

However for a while now there has been a terrible boot leak. I have no idea what to do because the only thing people have suguested to me is the spoiler. Funny thing is that i do not have a spoiler. People have also suguested the licence plate, well first of all the water is running from the top of the inside of boot down, not up, but anyways i made those screws as tight as they could go.

Nothing works. Everytime its rains my boot is full of water, but not under the parcel shelf, only where the spare wheel is. Everytime i open the boot the top of the boot is drenched and its starting to rust. Obviously there is no way of testing this.

Has anyone heard or had this problem themselves, its driving me insane and the boot stinks of wet carpet.....everyone knows how bad that smells. Please help.

Luke
AU2_XR8_220 is offline   Reply With Quote Multi-Quote with this Post
Old 23-08-2006, 03:40 PM   #256
fairmont au
fairmont ghia au 2 wagon
 
Join Date: Jul 2006
Posts: 37
Default

hi, how did you do the blue led dash lights? thanx
fairmont au is offline   Reply With Quote Multi-Quote with this Post
Old 23-08-2006, 03:42 PM   #257
fairmont au
fairmont ghia au 2 wagon
 
Join Date: Jul 2006
Posts: 37
Default

Quote:
Originally Posted by JC
Dash lights dull - fitted blue LEDs.
AU1 brakes ineffective - fitted DBA slotted rotors.
AU2 I6 hesitated badly at WOT - replace leads #3 & #6.
hi how did you fit the blue dash lights in your au falcon?
fairmont au is offline   Reply With Quote Multi-Quote with this Post
Old 23-08-2006, 04:57 PM   #258
twistgrip
Regular Member
 
Join Date: May 2005
Location: Tannum Sands, Q
Posts: 109
Default

my fuel gauge in my AU2 is all over the shop,goes from full-empty-half full, its all over the place,the prob is the sender? right?
__________________
" I want to die in my sleep like grandpa did,not screaming & yelling like the passengers in his car"
twistgrip is offline   Reply With Quote Multi-Quote with this Post
Old 23-08-2006, 10:22 PM   #259
fairmont au
fairmont ghia au 2 wagon
 
Join Date: Jul 2006
Posts: 37
Default

Quote:
Originally Posted by dangt69
i had, and recently got rid of, a 1999 au xls v8 ute wich would have to have been the worst car i have ever owned. power window switches were replaced (warranty) radiator replaced (warranty) a/c compressor replaced (warrantY) computer replaced (warranty) complete engine bay wiring loom replaced (warranty) fuel sender replaced (warranty) complete set of lifters replaced , one at a time!!!!!!!!!!! (warranty) they never could find the source of the knocking noise from the engine. replaced one at a time, i couldn't believe it. the bloody thing was in the ford workshop more often than not. in the end they told me the loud knocking noise was at an exceptable level and was normal. all this with only 30 000 klms on it. i didnt want to find out if the noise was a big end gone or something so i got rid of it. the transmission (auto) would change in and out of overdrive constantly, sitting at the lights in drive with foot on brake, and the speedo would rise up to 60 or 80 or even 100 kays and i wasnt moving. ( no i wasnt smoking the tyres). some times something would even beep at me four or five times. speedo would stop working at times. i wasnt sad to see the *** of that car. enjoy the probs of my 88 ea fairmont much better. probs with a 17 year old car are expected.
if you had the air conditioner on when it would go in and out of overdrive its normal its to keep the transmission cool.
fairmont au is offline   Reply With Quote Multi-Quote with this Post
Old 24-08-2006, 04:52 AM   #260
fullysick1
more of an alternator
 
Join Date: Nov 2005
Posts: 52
Wink

Quote:
Originally Posted by fairmont au
hi how did you fit the blue dash lights in your au falcon?
try this guy on ebay ... http://cgi.ebay.com.au/PAIR-12v-T5-W...QQcmdZViewItem
fullysick1 is offline   Reply With Quote Multi-Quote with this Post
Old 25-08-2006, 03:25 PM   #261
xr8-200
Regular Member
 
xr8-200's Avatar
 
Join Date: Aug 2006
Location: Perth
Posts: 269
Default

AU2 XR8 had problem where the clutch pedal would make a rattling noise. This was caused by a broken clutch return spring. I bought a new one from Ford yesterday which cost me $4 ( they had none in stock so they ordered one in and it only took an hour to get there which I was impressed with).
Another problem I had was faded and corroded B-pillar trims, bought a replacement set a while back for about $75.
xr8-200 is offline   Reply With Quote Multi-Quote with this Post
Old 25-08-2006, 06:48 PM   #262
Mrs B
Banned
 
Mrs B's Avatar
 
Join Date: Aug 2006
Location: Gold Coast
Posts: 339
Default power windows

I had the same thing happen to my ute and was told to push the button various times and hey presto it works
Mrs B is offline   Reply With Quote Multi-Quote with this Post
Old 04-09-2006, 06:06 PM   #263
blackxr1ute
Starter Motor
 
Join Date: Sep 2006
Location: syd
Posts: 9
Default tailshaft issues (vibrations)

i have a AU 1 XR8 ute and i have had issues with vibrations. When i bought the ute it had a modified 2 piece tailshaft in it (commodore i believe). I rang the original owner of it told me the original shaft gave much troubles. Anyone else had these dramas
blackxr1ute is offline   Reply With Quote Multi-Quote with this Post
Old 06-09-2006, 01:22 AM   #264
4DGIRL
Starter Motor
 
4DGIRL's Avatar
 
Join Date: Sep 2006
Location: newcastle
Posts: 4
Default

HI 2 ALL I'M ONLY NEW 2 THIS INTERNET STUFF SO BARE WITH ME HERE......
IVE OWNED AN AU3 SR NOW FOR JUST OVER A YEAR NOW BROUGHT IT WITH 65,000kms ON IT AND IVE DONE ABOUT 40,000 IN IT
*IVE MACHINED THE FRONT DISCS 2x
* I HAVE
NOTICED A QUITE KNOCK APEARING IN MOTOR THEN AGAIN I CANT SAY "I BABY HER".
IVE OWNED 3 FALCONS NOW AND ALL SEEM 2 HAVE BAD CAMBER/TOW'IN PROB NOT LONG AFTER GETTING WHEEL ALIGNMENTS DONE....
**HAS ANYONE ELSE HAD ANY AIR CON PROBS?
**OH AND BLOWING HEADLIGHT GLOBES???

DOSE ANYONE ELSE HAVE THESE PROBS.........?
4DGIRL is offline   Reply With Quote Multi-Quote with this Post
Old 09-09-2006, 07:22 AM   #265
judicator880
Starter Motor
 
judicator880's Avatar
 
Join Date: Jul 2006
Location: Emerald QLD
Posts: 4
Default The problems i have encounted

Hi Guys,

Im just new to the forums and would like to add the problems i have encounted with my 2002 Series III SE Ute.

Ive had that car for bout 9 months now and have had to replace:

- A/C Unit
- Drive Belt
- Washer Jets
- Spark Plugs
- Leads
- Clutch Cylinder

and yesterday i couldn't put it into any gears at all and if i tried would just grind them, got it towed to ford and told me it is the clutch and all the bearings :

I love my car and the AU's but it is just having to many problems :(
judicator880 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 09-09-2006, 07:24 AM   #266
judicator880
Starter Motor
 
judicator880's Avatar
 
Join Date: Jul 2006
Location: Emerald QLD
Posts: 4
Default

4DGirl

are you using custom headlight globes?
judicator880 is offline   Reply With Quote Multi-Quote with this Post
Old 13-09-2006, 07:06 PM   #267
bigjim
Regular Member
 
Join Date: Jul 2005
Location: Adelaide
Posts: 38
Default

Ive had my s1 XR6 for about 2 years, got 255,000kms on the clock, best car I've ever had. Aside from routine maint, here are the problems I have had.
1. Brake switch. Big surprise. 10 minute job

2.Clutch cable broke. I thought fair enough, its done 250k, replaced.

3.Pin that goes through clutch fork and holds clutch cable bent. Thought i had broken another clutch cable. Again, easy job to repair.

4.This one's a doozy. Running out of clutch adjustment, thought maybe it was the cable or the clutch pedal. Had a look, everything was fine. Pulled some heat shield off the firewall where the clutch cable goes through, guess what? Massive crack in firewall, about 60mm dia, 3/4 of the way around. Welded it up (luckily was able to do it without removing brake booster) but not happy at all. Firewall's shouldn't crack

5.Running out of clutch adjustment again. Checked the weld on the firewall, holding up fine. Looked at everything else, also fine. Decided to pull the gearbox out, must be pressure plate fingers. Get the dust excluder off gearbox and bugger me the clutch fork is cracked 3/4 of the way through. Pulled out gearbox, welded up the clutch fork. Now it works like a treat (touch wood)

Spose it's lucky that I can do all of this work myself, otherwise I'd be flat broke and hate my car, and I don't want that. I just hope the clutch system holds up.
bigjim is offline   Reply With Quote Multi-Quote with this Post
Old 16-09-2006, 12:43 PM   #268
goXF
Now AU powered
 
goXF's Avatar
 
Join Date: May 2005
Location: Neilborough
Posts: 215
Default

Quote:
Originally Posted by goXF
Well he actually still has issues with it......
Before the head gasket went on it he had it back with the dealer to fix a problem with the steering...
It handles really badly - more so at higher speeds but the dealer said they could see nothing wrong with it.......
anyway he definitely knew something was wrong because the AU sedan he had on loan while they were fixing his wagon was so much better...
He took it in to Pedders for their $14 check over....well apart from a few other things they told him the front shockers were done....WELL THAT COULD HAVE SOMETHING TO DO WITH THE PROBLEM.....now lets just wait and see if they cover that?

The problem has been fixed (but not by the dealer) - the steering rack had totally had it.
__________________
First car: 1987 XF Falcon 'S' sedan, 82,000Km - 134,000Km

Current Car: 2002 AU3 Falcon Forte sedan, 51,000Km when purchased - NOW: 81,000Km.
goXF is offline   Reply With Quote Multi-Quote with this Post
Old 20-09-2006, 09:57 AM   #269
paulw
Starter Motor
 
Join Date: Sep 2006
Posts: 1
Default AU Fairlane Window switches

I've had to replace four so far. The window goes down - then won't come up. The quick fix is to swap a switch from a window that's up - that'll get you home. (the panel pops out with a screwdriver and the switches can be dropped out of their clips by releasing the plastic latch each side.)

$22 each.... I smell a conspiracy Cleaning hasn't fixed any of mine. There's a tiny light bulb or diode attached to the contacts. I suspect that it's there to provide some electrical resistance when the window reaches its limits. Replacing that might fix the switch. Trouble is I don't know exactly what it is. Maybe some one clevererererer than me knows.

Other problems are noisy suspension bushes (solution lube 'em) A climate control that went Birko but eventually seems to have rest itself. The handbrake cable is obviously made of cheese... it needs adjusting every time I leave the car at Andrews parking... they must employ weight lifters to park the cars.
paulw is offline   Reply With Quote Multi-Quote with this Post
Old 24-09-2006, 12:37 PM   #270
towins
* TR@V *
 
towins's Avatar
 
Join Date: Sep 2006
Location: Ballarat Vic.
Posts: 6
Default

problem: cruise control does work...
dont take it to a specialist yet way will cost you heaps..
fix: under the steering wheel, at the base of the cluch there is a limit switch, that stops the crusie control when you push the cluch in. ajust the scew.
problem: speedometer has spikes..
fix: this is the sensor in the gear box, go to a ford dealer you can by a new on for about $50, it is easy to replace just undo a bolt and pull it out of the gear box... take off the gear and put onto the new sensor...
__________________
TR@V
towins is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 11:32 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL