Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 18-06-2010, 07:38 PM   #91
XH5LWEPN
Boost is here!!
 
XH5LWEPN's Avatar
 
Join Date: Oct 2005
Location: Perth W.A
Posts: 4,961
Default

Single 2.5" mandrel bent will be the best system for that. Just make sure its mandrel bent, not pressed.
But if you really wanna spend the money, go a twin 2 1/4" system. That will allow for any future mods you may do. I made 300+rwhp through my twin 2 1/4" system and made it very torquey.
__________________
STREETBUILT RACING
'99 XHII XR8, 363w, GT4508R on 16psi, E85, C4, 910rwhp - ET coming soon!
'78 XC Falcon 500, Desert Gold, 351w, V2 on 16psi, E85, C4, 9" - 10.15@132mph!
XH5LWEPN is offline   Reply With Quote Multi-Quote with this Post
Old 25-07-2010, 08:41 AM   #92
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

Question for you guys...
Will an AU1 185kw ECU run a AU2 200kw engine, in an AU1 with no dramas at all...?
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 25-07-2010, 09:27 AM   #93
RG
Back to Le Frenchy
 
RG's Avatar
 
Join Date: Feb 2005
Location: Back home.....
Posts: 13,346
Default

Quote:
Originally Posted by KR1STO
Question for you guys...
Will an AU1 185kw ECU run a AU2 200kw engine, in an AU1 with no dramas at all...?
Yes, you will need to get an Xcal3 to tune it though.
__________________
Quote:
Originally Posted by drew`SEVNT5
nah mate, aussie cars are the besterest and funnerest, nothing beats them, specially a poofy wrong wheel drive
07 Renault Sport Megane F1 Team R26 #1397
RG is offline   Reply With Quote Multi-Quote with this Post
Old 25-07-2010, 12:09 PM   #94
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

what would be different mate?
would it run fine without a tune...?
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 25-07-2010, 03:57 PM   #95
RG
Back to Le Frenchy
 
RG's Avatar
 
Join Date: Feb 2005
Location: Back home.....
Posts: 13,346
Default

Quote:
Originally Posted by KR1STO
what would be different mate?
would it run fine without a tune...?
It'll run it but the afr's will be wrong as will the idle and a few other bits and bobs.
__________________
Quote:
Originally Posted by drew`SEVNT5
nah mate, aussie cars are the besterest and funnerest, nothing beats them, specially a poofy wrong wheel drive
07 Renault Sport Megane F1 Team R26 #1397
RG is offline   Reply With Quote Multi-Quote with this Post
Old 25-07-2010, 03:58 PM   #96
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

will the ECU not learn from the engine...?
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 07-08-2010, 05:57 PM   #97
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

Quote:
Originally Posted by KR1STO
Question for you guys...
Will an AU1 185kw ECU run a AU2 200kw engine, in an AU1 with no dramas at all...?

well, to answer this question for any body reading this thread..
Yes, the engine will run fine!!!

cheers
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 11-08-2010, 12:46 AM   #98
RspecAU
BA GT-P Owner
 
RspecAU's Avatar
 
Join Date: Jan 2005
Location: In the GT-P
Posts: 1,599
Default

I'm wandering what mustang this engine came as looking for some after market parts which i'll need to get from the US.
__________________
DAILY DRIVER/TRACK CAR
BUILD NUMBER 006
299.5 rwkw's 12.74 @108mph ON MT's
ON MAXXIS MAV1's 275/45/17 13.27 @ 106mph
RspecAU is offline   Reply With Quote Multi-Quote with this Post
Old 11-08-2010, 01:22 AM   #99
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,704
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by RspecAU
I'm wondering what mustang this engine came as looking for some after market parts which i'll need to get from the US.
According to here:
http://en.wikipedia.org/wiki/Ford_Windsor_engine

In 1996, Ford replaced the 5.0L (302 cu in) pushrod Windsor V8 with the Modular 4.6L in the Mustang.
So last years for the windsor were 1995 (in the Mustang GT).

Keep in mind that the manifold etc was mounted 180 degrees around on the US cars (airbox on their passenger/our driver side), so not all parts will be suitable, but most should.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT

Last edited by JC; 11-08-2010 at 01:29 AM.
JC is offline   Reply With Quote Multi-Quote with this Post
Old 11-08-2010, 06:16 AM   #100
RG
Back to Le Frenchy
 
RG's Avatar
 
Join Date: Feb 2005
Location: Back home.....
Posts: 13,346
Default

Explorer, not Mustang.
__________________
Quote:
Originally Posted by drew`SEVNT5
nah mate, aussie cars are the besterest and funnerest, nothing beats them, specially a poofy wrong wheel drive
07 Renault Sport Megane F1 Team R26 #1397
RG is offline   Reply With Quote Multi-Quote with this Post
Old 11-08-2010, 09:04 AM   #101
XH5LWEPN
Boost is here!!
 
XH5LWEPN's Avatar
 
Join Date: Oct 2005
Location: Perth W.A
Posts: 4,961
Default

Most parts are from the Mustangs up to '93, like all your engine internals etc and manifolds/throttle bodies.
But then theres a few things that are from the 94-95 mustangs.
Takes it a bit of research to work out which little things are different, and the few things that arent interchangeable. Nothing a couple of hours on the US forums doesnt fix.
__________________
STREETBUILT RACING
'99 XHII XR8, 363w, GT4508R on 16psi, E85, C4, 910rwhp - ET coming soon!
'78 XC Falcon 500, Desert Gold, 351w, V2 on 16psi, E85, C4, 9" - 10.15@132mph!
XH5LWEPN is offline   Reply With Quote Multi-Quote with this Post
Old 14-08-2010, 12:39 PM   #102
CRAIGAU3220
Cat be Still !!!
 
CRAIGAU3220's Avatar
 
Join Date: Oct 2007
Location: Perth. WA
Posts: 1,672
Default

Quote:
Originally Posted by RG
Explorer, not Mustang.
As RG said, All AU 5.0L are the same as the last 5.0L Explorer engines.
CRAIGAU3220 is offline   Reply With Quote Multi-Quote with this Post
Old 27-08-2010, 11:59 PM   #103
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

Do the AU V8's have Fail Safe Cooling...??
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 28-08-2010, 12:00 AM   #104
UU TS50
T3 TS50 075
 
UU TS50's Avatar
 
Join Date: Nov 2007
Location: Perth
Posts: 1,146
Default

Quote:
Originally Posted by KR1STO
Do the AU V8's have Fail Safe Cooling...??
No just the 6's
__________________
Cheers John

My car T3 TS50 #75 Blueprint manual 1/4 mile 13.38 @ 102.97 mph TS 50 = 237.1 rwkw
UU TS50 is offline   Reply With Quote Multi-Quote with this Post
Old 28-08-2010, 12:01 AM   #105
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

That was quick!!!
Thanks mate....
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 29-08-2010, 08:19 PM   #106
Revolver
Big Member
Donating Member1
 
Revolver's Avatar
 
Join Date: Dec 2009
Location: SE Qld
Posts: 5,874
Default

If the TL50's were part of the T series range, (which in my mind didnt The TE/S/Pursuit all run 5.6 from day dot?) Why didnt they get the 5.6 as standard? & what did they have in them other than that? The 220kw donk from the XR8?
__________________
The Scarlet Fairlane: 94 5.Slow Litre NC II Fairlane 488800kms & Climbing
Rollin' on genuine ELGT wheels.
K&N Filter
/////Alpine Sound.
EBGT Momo Woodgrain Steering Wheel
The Scarlet Fairlane Build Thread

Project "White Knight"
93 ED XR6
ROH Alloys
Momo wheel
Cruise
Sunroof
Premo Sound
Manual
HO Goodies
PWK Build Thread

1990 Yamaha FZR 250: 59000ks & climbing. New fairing, old tank, my angry mosquito in a coffee tin! 14.977 1/4mile.

Last edited by Revolver; 29-08-2010 at 08:24 PM.
Revolver is offline   Reply With Quote Multi-Quote with this Post
Old 29-08-2010, 08:22 PM   #107
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

The T1 TE50 and TL50 had the 200kw engine
The T1 TS50 had the 220kw engine

All the T2's (TE/S/L)had the 220kw engine
and
All the T3's (TE/S/L) had the 250kw 5.6l stroker engine

The early XR8 pursuits had the 200kw engine and the later XR8 "pursuit 250's" had the 5.6l 250kw engine..


Hope that helps..
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 29-08-2010, 08:25 PM   #108
Revolver
Big Member
Donating Member1
 
Revolver's Avatar
 
Join Date: Dec 2009
Location: SE Qld
Posts: 5,874
Default

Gaha! Got it Going to the T-room to ask some questions now...
__________________
The Scarlet Fairlane: 94 5.Slow Litre NC II Fairlane 488800kms & Climbing
Rollin' on genuine ELGT wheels.
K&N Filter
/////Alpine Sound.
EBGT Momo Woodgrain Steering Wheel
The Scarlet Fairlane Build Thread

Project "White Knight"
93 ED XR6
ROH Alloys
Momo wheel
Cruise
Sunroof
Premo Sound
Manual
HO Goodies
PWK Build Thread

1990 Yamaha FZR 250: 59000ks & climbing. New fairing, old tank, my angry mosquito in a coffee tin! 14.977 1/4mile.
Revolver is offline   Reply With Quote Multi-Quote with this Post
Old 29-08-2010, 08:28 PM   #109
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

haha.. have fun!!
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 29-08-2010, 08:28 PM   #110
UU TS50
T3 TS50 075
 
UU TS50's Avatar
 
Join Date: Nov 2007
Location: Perth
Posts: 1,146
Default

Quote:
Originally Posted by Blue Beast II
If the TL50's were part of the T series range, (which in my mind didnt The TE/S/Pursuit all run 5.6 from day dot?) Why didnt they get the 5.6 as standard? & what did they have in them other than that? The 220kw donk from the XR8?
Kristo beat me to it
__________________
Cheers John

My car T3 TS50 #75 Blueprint manual 1/4 mile 13.38 @ 102.97 mph TS 50 = 237.1 rwkw
UU TS50 is offline   Reply With Quote Multi-Quote with this Post
Old 29-08-2010, 08:30 PM   #111
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

Quote:
Originally Posted by Congo XR8
Only the series 3 T series got the 5.6 and yes that includes the 3 only T3 TL50's that were built.
T1 TE50 = 200kw
T1 TL50 and TS50 = 220kw ???????
T2 all got the 220kw

The T1 TL50's were only 200kw mate..
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 06-09-2010, 04:22 PM   #112
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

Ok guys another V8 question...
Can you put 1.7 ratio roller rockers on the 200kw (which has 1.6 rr) and not have any clearance issues...?
What sort of performance will this gain..?

cheers
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 06-09-2010, 06:30 PM   #113
XH5LWEPN
Boost is here!!
 
XH5LWEPN's Avatar
 
Join Date: Oct 2005
Location: Perth W.A
Posts: 4,961
Default

Yep you'll get away with 1.7 rockers on that cam no dramas.
If they are the same bolt-on non-adjustable type that Ford used then they'll even fit under ya stock covers. But if you go adjustables, you may have to go aftermarket covers or get some nice thick valve cover gaskets.
__________________
STREETBUILT RACING
'99 XHII XR8, 363w, GT4508R on 16psi, E85, C4, 910rwhp - ET coming soon!
'78 XC Falcon 500, Desert Gold, 351w, V2 on 16psi, E85, C4, 9" - 10.15@132mph!
XH5LWEPN is offline   Reply With Quote Multi-Quote with this Post
Old 06-09-2010, 06:41 PM   #114
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

Thanks mate..
Will it make much of a gain...?
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 11-09-2010, 02:29 PM   #115
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

Ok question again guys...

What make of roller rockers did the 200kw engine come with from tickford..?
I was always under the impression the the 200'sahd Crane 1.6 rr and the 220's had Yella Terra 1.7 rr...?

I had the rocker covers off today on mine (200kw) and it has Yella Terra roller rockers...
What's going on...?

Cheers
Kris
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 11-09-2010, 09:37 PM   #116
AUIIPURSUIT
pursuit ute baby
 
AUIIPURSUIT's Avatar
 
Join Date: Jun 2010
Posts: 864
Default

maybe you got 'stooged' and got a 220 :P

or maybe they were upgraded to YTs... i was under the same impression from stock though.
__________________
my ride : AU xr8 pursuit ute
AUIIPURSUIT is offline   Reply With Quote Multi-Quote with this Post
Old 11-09-2010, 09:45 PM   #117
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

hahaha.. maybe..! nah, it needs the ticky throttle body...
could be an upgrade... hard to know being a second hand engine...
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 12-09-2010, 08:41 AM   #118
XH5LWEPN
Boost is here!!
 
XH5LWEPN's Avatar
 
Join Date: Oct 2005
Location: Perth W.A
Posts: 4,961
Default

I've also been scepticle on this.
IMO, just a wild stab, i think both the 200kw and 220kw had 1.7 rockers.
If you look at the specs of the 200kw cam, the cam lift is too small to run a 1.6 rocker. That is IIRC.
__________________
STREETBUILT RACING
'99 XHII XR8, 363w, GT4508R on 16psi, E85, C4, 910rwhp - ET coming soon!
'78 XC Falcon 500, Desert Gold, 351w, V2 on 16psi, E85, C4, 9" - 10.15@132mph!
XH5LWEPN is offline   Reply With Quote Multi-Quote with this Post
Old 12-09-2010, 08:50 AM   #119
KR1STO
Just another mock-up..
 
KR1STO's Avatar
 
Join Date: Sep 2006
Location: In an AU Fairlane somewhere...
Posts: 9,966
Default

Cool.. thanks mate...

so does that mean the only difference between the 200's and 220's are the throttle bodies and (on the 220's) the heads having a bit of a massage...?
__________________
Desire isn't driven by the heart, the mind or the wallet.
Desire comes from another place.
It's created by the smell of burnt fuel under full throttle and the look a car gives you when you're washing it alone at night...

see my car here:
Built my own TL50!!!

[SIGPIC][/SIGPIC]
KR1STO is offline   Reply With Quote Multi-Quote with this Post
Old 12-09-2010, 08:55 AM   #120
XH5LWEPN
Boost is here!!
 
XH5LWEPN's Avatar
 
Join Date: Oct 2005
Location: Perth W.A
Posts: 4,961
Default

Possibly, i cannot be sure...yet.
Other things are obviously the ported heads with larger valves, the port matched lower manifold, the camshaft specs and the engine oil cooler.
I've never known much about the stock exhausts on these, but maybe there was a difference there.
I'd say a difference in the ECU aswell.
__________________
STREETBUILT RACING
'99 XHII XR8, 363w, GT4508R on 16psi, E85, C4, 910rwhp - ET coming soon!
'78 XC Falcon 500, Desert Gold, 351w, V2 on 16psi, E85, C4, 9" - 10.15@132mph!
XH5LWEPN is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 05:34 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL