Wheels That Fit Brembo Brakes

[kempy311]

Originally Posted by shaine71

anyone know if VERTINI DRIFT 20X8.5 +35 will fit 6pot brembo

There is a blue ute on here with black 4 pots so they should fit.

[kempy311]

Does anyone no if Lenso D1r's rear 20x10 will clear 4 pots on the rear? as I have been told they probably wont.

[M4CO]

Do genuine Ford 19" FG luxury wheels fit 4 pot front Brembos

[deepblonde]

Originally Posted by M4CO

Do genuine Ford 19" FG luxury wheels fit 4 pot front Brembos

image

No, they don't .

[Benno73]

Originally Posted by M4CO

Do genuine Ford 19" FG luxury wheels fit 4 pot front Brembos

image

I haven't trieed them myself, but would be surprised if they didn't.

[deepblonde]

Originally Posted by Benno73

I haven't trieed them myself, but would be surprised if they didn't.

Originally Posted by FGXR6TUTE

I can confirm that FG G6E 19" option rims will NOT fit, nor will 18" or 19" XR option wheels.

They do not fit over 4 or 6 piston Brembo calipers.

[deepblonde]

Originally Posted by M4CO

Do genuine Ford 19" FG luxury wheels fit 4 pot front Brembos

image

Originally Posted by Lightning Strike GT

Brett What I found out - the hard and expensive way - when I put the big red hats on the BF XR8
I borrowed a few 18 and 19 FORD wheels from mates, neighbours a few in the club- a wrecker was only to happy to help out as well
BA XR 18 - yes
BF XR 18 - no
FG XR 18 - no
FG 19 XR option - no
FG 50th ann - no
FG G6E 18 - no
FG G6E turbo 19 - no
The only FORD (non FPV) wheel that will clear them is the ENKEI BA XR option series in 18 X 8 - all other B / F series non FPV will not fit end of story
All B and F series FPV wheels in 18" and 19" will fit as well as the Territory FX6 wheels
Sorry forgot to add The 18" Tickford Azzuro and the 18" Tickford Pursuit wheels fit - the AU series 18" Tickford Rebel wheels I am unsure of I did not test these
Hope this sheds a bit of light on things

This says it all...

[kempy311]

Originally Posted by M4CO

Do genuine Ford 19" FG luxury wheels fit 4 pot front Brembos

image

Nope not without running a spacer.

[M4CO]

Thanks

[shaine71]

http://img40.imageshack.us/img40/6172/3gnz.jpg

[shaine71]

Vertini Drift.6 pot brembos

[PepeLePew]

shaine71 +35 though?

[ELXR6T]

http://www.gumtree.com.au/s-ad/ballarat-central/wheels-tyres-rims/for-swap-fg-xr6-turbo-rims-19-will-fit-ba-bf-also/1031847355

will these fit ?

[Ride]

Definitely not

[ELXR6T]

so had to find a set of wheels that i like and fit lol

[shaine71]

Originally Posted by PepeLePew

shaine71 +35 though?

will have to check for you, but from memory I think they are.

[shaine71]

Originally Posted by shaine71

will have to check for you, but from memory I think they are.

20x8.5 +25

[GT450]

Enkei 19X8.5" RPO3 with 42 offset will they fit a BF with brembos please or is the offset wrong?? Thanks

[dl86]

I recently bought a set of 18" Enkei RPF1 for my 2012 GT in the following size

18 x 8.5 +30 Front
18 x 9.5 +38 Rear

Still got a bit of tread left on my current wheel set on the stock 19's so no tires yet.











Rear

[FLOORED]

Look out for some new custom made brake kits in the New Year to clear more genuine and aftermarket wheels. More info to come as we get them made and it will happen.

[BAGT514]

Originally Posted by kempy311

Does anyone no if Lenso D1r's rear 20x10 will clear 4 pots on the rear? as I have been told they probably wont.

Do you want me to check for you? I might be able to get John (FPVBOSS335) around to try his on mine. His is a GT with PBR rears so we will have to try it on the GT-P.
I won't bother if you don't want them though

Shane

[BAGT514]

Originally Posted by FLOORED

Look out for some new custom made brake kits in the New Year to clear more genuine and aftermarket wheels. More info to come as we get them made and it will happen.

Matt - as you know I pulled my Gianni Blitz's off my BA GT when I purchased the DBA 5000's & 4000's off you & the 6/4 Brembo's from Frank @ Wheel King..
I have those wheels sitting on my girlfriend's BA Wagon & have purchased a BA GT PBR set-up for it but not fitted it yet.
What chances will the new big brake set-up you are producing fit the Gianni's???
Tell me good news stories & I will sell the BA GT set-up tommorrow

Shane

[kempy311]

Originally Posted by BAGT514

Do you want me to check for you? I might be able to get John (FPVBOSS335) around to try his on mine. His is a GT with PBR rears so we will have to try it on the GT-P.
I won't bother if you don't want them though

Shane

Na all good champ I have got a set of PBR rears from matt at RBS. I looked at the rears and there is no chance of them fitting.

[BAGT514]

Originally Posted by kempy311

Na all good champ I have got a set of PBR rears from matt at RBS. I looked at the rears and there is no chance of them fitting.

FG - PBR's - DR1's



They are pretty close though. This has 275/30/20's on the rear

[FLOORED]

Originally Posted by BAGT514

Matt - as you know I pulled my Gianni Blitz's off my BA GT when I purchased the DBA 5000's & 4000's off you & the 6/4 Brembo's from Frank @ Wheel King..
I have those wheels sitting on my girlfriend's BA Wagon & have purchased a BA GT PBR set-up for it but not fitted it yet.
What chances will the new big brake set-up you are producing fit the Gianni's???
Tell me good news stories & I will sell the BA GT set-up tommorrow

Shane

Shane we are going to try and move the brakes as far in as possible and i have some Simmons wheels here to use as well as some FG std wheels we are looking at and this time around the kits should happen. These will only be front kits but hang on as it is back to the drawing board as soon as the machinist is back at work. Keep yours eyes open plus we are doing a smaller front 4 piston kjit that looks to fit a 17" FG std wheel.

[Gambit]

Forgeline rb3c 18x8 front 18x11 rear. Brakes off my pursuit 250 but could be later model falcon. 4/4 setup

[F6T]

BA FPV typhoon rims fit over 6 pot brembo but only just. I reckon less then 0.5mm clearance between the barrel and the cross pipe at the bottom of the calliper - very tight fit. Uncomfortably close.

[FLOORED]

Just made a new FG 362mm kit with the AP Racing CP5555 calipers and they sit 10mm further in than the Brembo kit. The outside of the caliper sits inline with the ends of the wheel studs. There is no reason we can't adapt a Brembo 6 pot to this and also we are also looking at moving the Brembo caliper further inwards on the FG in the next week. There may be some light at the end of the tunnel for some of you.
Also we are making a smaller 4 or 6 piston kit that will fit behind a 17" wheel.

[graphicgoose]

That's awesome news mate! I'm assuming this is just for the fronts? Is there any chance of doing similar for some 4 pot rears? As I know for some of us rear upgrade calipers are an issue. Would be great to be able to snag a 6 pot/4 pot combo upgrade that fits under standard wheels!

[FLOORED]

Originally Posted by graphicgoose

That's awesome news mate! I'm assuming this is just for the fronts? Is there any chance of doing similar for some 4 pot rears? As I know for some of us rear upgrade calipers are an issue. Would be great to be able to snag a 6 pot/4 pot combo upgrade that fits under standard wheels!

A rear kit is being thought of but the outlay is quiet huge to do the disc rotors but keep an ear and eye out for it.