|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
31-03-2018, 07:12 PM
|
#1 | ||
|
Regular Member
Join Date: Mar 2013
Posts: 49
|
I finally found what I believe has been the cause of my driver's side wet carpets in my 2012 MC Mondeo. The problem is that the underbody heatshield material presses against the outside of the condensate drain exit - and with a bit of contaminant in the water causes it to block.
I removed a bolt to loosen the material, stuck the handle of my socket set ratchet up inside and formed the heat shield material around it to create a void over the end of the condensate drain. (see photos) I won't go into Ford's pathetic attempts to solve this problem 2 years ago. |
||
|
|
|
01-04-2018, 02:41 AM
|
#2 | ||
|
Challenge Accepted!
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
|
that's what I found also:
https://fordforums.com.au/showpost.p...&postcount=115 https://fordforums.com.au/showpost.p...42&postcount=3
__________________
Undecided replacement... [SOLD] -2009 MB Mondeo Zetec TDCI- [SOLD] |
||
|
|
|
| This user likes this post: |
|
| Thread Tools | |
| Display Modes | |
|
|
Wet carpets - blocked aircon drain found
Linear Mode
