FG rear brake kit

[petchyboy]

Hi Brett,

Coming down your way in December again and would love to bolt up a rear brake kit. How's the development of it coming along?
Loving the coilovers and front brakes, just need the rears to finish her off
Cheers,

Nathan

[Shockworks]

Rear discs have landed for the Ford rear, using the Territory calipers This now completes the look of our brake upgrade for the Falcon.
Rear set is $820 plus delivery:-)
Cheers

[gtxxr6]

rear discs are still going perfect in my car too brett, no complaints!

[petchyboy]

Awesome stuff Brett! Will see you mid December ��
Just to double check I need to supply territory calipers / pads and braided lines?

Cheers

[Shockworks]

Originally Posted by petchyboy

Awesome stuff Brett! Will see you mid December ��
Just to double check I need to supply territory calipers / pads and braided lines?

Cheers

Hey Petchyboy, Yeah Terri calipers and pads, braided lines are up to you sir:-)
Cheers
Brett

[petchyboy]

Cheers Brett, how much of a difference would the braided lines make on the rear, and would the same as you supplied me on the front kit work on the rear?
Will start searching eBay for some calipers

Cheers,

Nathan. (Qld)

[Shockworks]

Originally Posted by petchyboy

Cheers Brett, how much of a difference would the braided lines make on the rear, and would the same as you supplied me on the front kit work on the rear?
Will start searching eBay for some calipers

Cheers,

Nathan. (Qld)

Hey Nathan,
Yeah the braided lines do make a difference on the track when the temps come up with pedal feel. Best to matbe do the rear if the front has the lines already mate:-)
Cheers
Brett

[petchyboy]

Ok cheers for that. Sounds like a plan, will be in touch shortly

[puck_lindsay]

Hi guys, how do these compare to a DBA T3? Lighter I assume...

[Shockworks]

Originally Posted by puck_lindsay

Hi guys, how do these compare to a DBA T3? Lighter I assume...

Hi Lindsay,
We have a radial vane design which I think is better for heat dissipation and our discs are high carbon so will last a very long time. The major part of the rotor is the alloy hat so should be lighter.

Cheers

[Shockworks]

Well, we have not done a special in a while and many guys have been waiting for the rear discs to match the front upgrade so,

To all forum members, our new design rear brake discs for $720 a set (plus delivery) which is $100 until we sell out. We have about 8 sets left at this price.

Just some thanks for the great support from the Australian Ford Forums:-)

Cheers
Brett

[puck_lindsay]

Sweet, will grab a set

[Shockworks]

Originally Posted by puck_lindsay

Sweet, will grab a set

Hey Lindsay,
For any orders just send me mail to [email protected].

I will then send you our account details. If you can supply your address and contact number for the freight company that would be good.
Where are you located?
Freight QLD and WA is @60 and NSW, SA is $40.

Cheers
Brett

[DSP]

Hi Brett - will your rear disks suit an FG ute ?

Thanks

[Shockworks]

Originally Posted by DSP

Hi Brett - will your rear disks suit an FG ute ?

Thanks

Hi DSP,
At this stage we only have the rear discs for the IRS rear but working on the ute next.

Cheers

[Grum]

Hi Brett,

Do you have a two piece rear rotor to fit the fpv 330 x 28mm?

Are the ute and irs part not the same? OEM are aren't they?

[Shockworks]

Originally Posted by Grum

Hi Brett,

Do you have a two piece rear rotor to fit the fpv 330 x 28mm?

Are the ute and irs part not the same? OEM are aren't they?

Gee, sorry Grum,

Yes, the rear discs we supply also fit the ute rear using the Terri calipers:-)

Cheers
Brett