Pod Filter

[BLKPHN]

hey guys,

Before i say anything yes i know it not the best to have a pod just sat in the engine bay, and the heat from the engine is bad and all that,
BUT

WOW the noise is fantastic!! it really make a noise and as for the open pod in the engine bay im going to make up a stainless steel intake pipe and then make a alluminum box to surround it but at the moment im happy with the restult evan if it doesn't give me any more performance it sounds Great!!.

[Redrum]

Just needs a bluepower box around it and I am all smiles!!! :hihi:

[X ORSMXR]

Yeah dude needs one of Chris's air boxes and you're all good...

[JoesAu]

make your own box how hard is it!! extend that pipe with pod to behind headlight furthest away from engine then build over the top it. Why pay hundreds for plastic.

[Redrum]

Originally Posted by JoesAu

make your own box how hard is it!! extend that pipe with pod to behind headlight furthest away from engine then build over the top it. Why pay hundreds for plastic.

If you have the skill, why not. Whilst he is at it, he could weld up an exhaust.

[Craig]

Your right it will sound fantastic BUT it won't be efficient, the worst thing you can do in this case is have HOT air blowing into your induction especially when the thermo fans come on.....that's when you see inlet temps rise sharply.

Get that thing covered ASAP man.....

[BLKPHN]

Originally Posted by Craig@ACE

Your right it will sound fantastic BUT it won't be efficient, the worst thing you can do in this case is have HOT air blowing into your induction especially when the thermo fans come on.....that's when you see inlet temps rise sharply.

Get that thing covered ASAP man.....

oh yeah i know its no good at all, im making up a alluminum cover box, and making up a nice intake pipe too.

[BLKPHN]

Originally Posted by Redrum

If you have the skill, why not. Whilst he is at it, he could weld up an exhaust.

well accually i will be making it, and a intake pipe as well, im thinking of alluminum box as the heat should not be retained in the alluminum. and it will suit the color mmm Lightning strike!!

and accually i have thought about making up my own exhaust and getting muffelrs from VPW and doing the piping. But i think it willbe easyer to just get a difillipo cbf factor is very high in this case.

[Craig]

Originally Posted by ORSM54

and accually i have thought about making up my own exhaust and getting muffelrs from VPW and doing the piping. But i think it willbe easyer to just get a difillipo cbf factor is very high in this case.

Dead right mate, it's good to be different and do your own thing but you can't go past a product that continually comes out on top in the POWER and sound department.

Being a Di Filippo agent and a sponsor of this club we can do a deal.

Cheers Craig

[BLKPHN]

Originally Posted by Craig@ACE

Dead right mate, it's good to be different and do your own thing but you can't go past a product that continually comes out on top in the POWER and sound department.

Being a Di Filippo agent and a sponsor of this club we can do a deal.

Cheers Craig

Cheers mate, yes thats why i really don't want to go any other way from the results the produce, btw i t was me who rang up today about the Throttle body spacer, and after talking to chris i felt it wasn't worth it as in the end i want to supercharge my car and it is really dead money then.

[Redrum]

Originally Posted by ORSM54

well accually i will be making it, and a intake pipe as well, im thinking of alluminum box as the heat should not be retained in the alluminum. and it will suit the color mmm Lightning strike!!

and accually i have thought about making up my own exhaust and getting muffelrs from VPW and doing the piping. But i think it willbe easyer to just get a difillipo cbf factor is very high in this case.

If you know what you are doing go for it!! One of my good mates must have made 6 or 7 exhausts for his XF. He could never get the note right and had quite a few issues. In the end he just bought and tired and tested system.

[BLKPHN]

well ive started on the air box, ive decided to go fibreglass, its just drying atm i will post up pics once it is done!!

[BLKPHN]

Finished the box just needs a sand and a paint!

oh and a nice intake pipe!!



could do with a clean engine bay too!!

[Redrum]

Is looking the goods thus far.

[BLKPHN]

Originally Posted by Redrum

Is looking the goods thus far.

why thanking you!

[ORSMF6]

keep up the good work dude ...
It always means more when you make and design the mods your self ...

I am looking forward to see what else ou come up with in time ..

[BLKPHN]

ALL done finished and looks ok and sounds great!





Oh and i got my new plates too!!

[ORSMEB]

Lol! Looks great, but I do think you should smooth it out. Maybe not right down, but a little bit...

[Redrum]

Last time I made some custom kick panels out of fibreglass, got some bog and put it over the top, sanded it back and got nice smooth finish!

[MR_LON]

god man you make me cringe with a rough glass job like that ;) ;) jk
if you want some tips on glassing let me know i do it for a living
always happy to help