Race Brakes Sydney are here to help.

**FLOORED** · 10-07-2015, 09:24 AM

Race Brakes Sydney have been a Ford Forum sponsor for many years now and have been helping AFF members stop there cars for both street and race applications for just as long. At RBS we work with the customer to achieve a brake package that suits your budget and driving style and we have been supplying products like DBA and Ferodo for many years along with various other brands like Hawk brake pads , Project MU , RDA , Winmax , PBR/BOSCH and many others just to name a few.
If anyone requires any help or info for there car please don't hesitate to contact us by phone,email or PM as many of you have done over the years and we will continue to do thankyou. As most of you know we can freight Australia wide and also organize for pick ups in most capitol cities if the stock is available at no cost to you from the various depots we have access to.
Thankyou for your support so far and your continued support as well.

Thankyou Sincerely
Matthew Pearce

BlackBullet64 · 23-07-2015, 11:24 PM

Hi ive got brake squeel probs with my BF XR8 06 premium PBR setup
What pads do u recommend for the Stock rotors ive got a bad feeling the front disc are
poor steel as they rainbow up and squeel with ultimates, thermal quiets so far
have a new set of PBR OE`s to put on thinking the front rotors are of bad quality steel
Put new spring shims in,new guide pins but all with same rotor even machined the front rotors with new wheel bearings. What pads do u suggest im thinking another set of thermal quiets with a change of rotor. Also new rear disks after 6 weeks started grooving up with bendix ultimates.Car is standard use but has a HP boss engine bit heavy.

**FLOORED** · 24-07-2015, 09:50 AM

Quote:

Originally Posted by BlackBullet64

Hi ive got brake squeel probs with my BF XR8 06 premium PBR setup
What pads do u recommend for the Stock rotors ive got a bad feeling the front disc are
poor steel as they rainbow up and squeel with ultimates, thermal quiets so far
have a new set of PBR OE`s to put on thinking the front rotors are of bad quality steel
Put new spring shims in,new guide pins but all with same rotor even machined the front rotors with new wheel bearings. What pads do u suggest im thinking another set of thermal quiets with a change of rotor. Also new rear disks after 6 weeks started grooving up with bendix ultimates.Car is standard use but has a HP boss engine bit heavy.

If they Rainbow up i would guess they are getting over hot but at the same time we have a few people telling us they have squeal issues with Bendix Ultimates at the moment.
You could skim the rotors and go either a Project MU NS400 pad to see if that helps first before replacing the rotors but you know me i am DBA most of the time if you need new rotors.

XR23IL · 11-11-2015, 04:12 PM

Hi Matt
Can u give us a price for braided lines for a BA XR8 running 6/4 brembos please and what brake fluid would u recommend and how much would I needed to replace my existing. Cheers Stuart

**FLOORED** · 11-11-2015, 05:33 PM

Quote:

Originally Posted by XR23IL

Hi Matt
Can u give us a price for braided lines for a BA XR8 running 6/4 brembos please and what brake fluid would u recommend and how much would I needed to replace my existing. Cheers Stuart

$290 a set if it has traction control and 1 ltr of fluid should be enough at $25 per 500ml bottle AP Racing 5.1

XR23IL · 11-11-2015, 05:58 PM

Beauty how do I go about ordering and yeah traction control and while I am at it what pads would u recommend for some spirited driving and odd track day

**FLOORED** · 13-11-2015, 04:55 PM

Quote:

Originally Posted by XR23IL

Beauty how do I go about ordering and yeah traction control and while I am at it what pads would u recommend for some spirited driving and odd track day

The Winmax brake pads in the W3 material is my choice at $265 a set just pm me when your ready with the info and i will get it sorted for you.

Azgtv6 · 09-02-2016, 05:17 PM

Hello Matt,
I have a fg ute with the 298mm disc.
As its a 1 tonne ute with 16inch wheel, do you know if I can upgrade to the xr8 disc and caliper?
Has anyone done this or do I need to supply some dimensions ?

**FLOORED** · 09-02-2016, 05:45 PM

Quote:

Originally Posted by Azgtv6

Hello Matt,
I have a fg ute with the 298mm disc.
As its a 1 tonne ute with 16inch wheel, do you know if I can upgrade to the xr8 disc and caliper?
Has anyone done this or do I need to supply some dimensions ?

From memory you will need the 17" wheels but besides that it will bolt straight up.

**Bluehoon** · 09-02-2016, 06:35 PM

You still sell the Brembo OEM pads for BF falcons?

being about best pad I have ever used.

Recommend anyone around wetherill park to machine slotted rotors?
Not warped, just clean surface up..

**FLOORED** · 10-02-2016, 08:46 AM

Quote:

Originally Posted by Bluehoon

You still sell the Brembo OEM pads for BF falcons?

being about best pad I have ever used.

Recommend anyone around wetherill park to machine slotted rotors?
Not warped, just clean surface up..

Standard twin piston caliper you mean? I can get the Brembo aftermarket pads still if you want them and if you drop the rotors off i can get them machined for you just pick them up later in the day if you like.

**data_mine** · 16-05-2016, 10:36 AM

Matt,

Can you do new master cylinders for a BF GT-P (are they any different to other BF models?).

I think mine may be leaking internally, as the pedal will not hold pressure, no evidence of leaks anywhere else, and the fluid is new SRF (~3 months) and air free. Had a disturbingly close look at the wall at the Dipper on the weekend.

thanks

**FLOORED** · 16-05-2016, 05:27 PM

Quote:

Originally Posted by data_mine

Matt,

Can you do new master cylinders for a BF GT-P (are they any different to other BF models?).

I think mine may be leaking internally, as the pedal will not hold pressure, no evidence of leaks anywhere else, and the fluid is new SRF (~3 months) and air free. Had a disturbingly close look at the wall at the Dipper on the weekend.

thanks

Can you send me the vin number and have you tried bleeding the system after the track day to see if it is any better?

**FLOORED** · 18-05-2016, 01:22 PM

Quote:

Originally Posted by data_mine

Matt,

Can you do new master cylinders for a BF GT-P (are they any different to other BF models?).

I think mine may be leaking internally, as the pedal will not hold pressure, no evidence of leaks anywhere else, and the fluid is new SRF (~3 months) and air free. Had a disturbingly close look at the wall at the Dipper on the weekend.

thanks

Can get a master cylinder for you it would be $278 delivered

FPV GTHO · 18-05-2016, 01:37 PM

Quote:

Originally Posted by FLOORED

Can get a master cylinder for you it would be $278 delivered

Did it end up being different to standard BF?

**FLOORED** · 18-05-2016, 02:58 PM

Quote:

Originally Posted by FPV GTHO

Did it end up being different to standard BF?

Yes there are about 4 different master cylinders from memory as some are sedans and some are utes plus traction control and ABS including DSC as well.

FPV GTHO · 18-05-2016, 03:12 PM

Is there any option to upgrade then from a standard BF master cylinder?

**data_mine** · 18-05-2016, 03:28 PM

Quote:

Originally Posted by FLOORED

Can get a master cylinder for you it would be $278 delivered

Thanks just sent you an email with details.

**FLOORED** · 19-05-2016, 08:49 AM

Quote:

Originally Posted by FPV GTHO

Is there any option to upgrade then from a standard BF master cylinder?

No sorry

gabwah_32 · 27-07-2016, 10:51 AM

am looking to upgrade the standard rotors pads n possibly fluid in my 2010 f6.
4 pot brembos front n pbr rears. whats your recommendation for a late braker like myself? the standard setup really isnt cutting it anymore.

thanks in advance

**FLOORED** · 27-07-2016, 05:52 PM

Quote:

Originally Posted by gabwah_32

am looking to upgrade the standard rotors pads n possibly fluid in my 2010 f6.
4 pot brembos front n pbr rears. whats your recommendation for a late braker like myself? the standard setup really isnt cutting it anymore.

thanks in advance

DBA T3 rotors if you need rotors and is it just for street use or also some track use ? Are you getting fade or just want a better stopping pad and if for street do you care about dust because you will get a better pad if dust isn't an issue and i would go the Ferodo DS2500 pad and the DS Performance on the rear.

gabwah_32 · 27-07-2016, 07:14 PM

only street use mate. am really just after a better stopping pad, but i do get a little fade. also have the abs cutting in a bit as well.
dust n squeal aren't my highest of concerns but the less i can have of both the better.

much appreciated

**FLOORED** · 28-07-2016, 10:20 AM

Quote:

Originally Posted by gabwah_32

only street use mate. am really just after a better stopping pad, but i do get a little fade. also have the abs cutting in a bit as well.
dust n squeal aren't my highest of concerns but the less i can have of both the better.

much appreciated

I will PM you.

taylor · 22-02-2017, 12:20 PM

Hi Matt looking to get front rotors and pads for Fg f6 4 pot calipers delivery to 2731

**FLOORED** · 22-02-2017, 01:27 PM

Quote:

Originally Posted by taylor

Hi Matt looking to get front rotors and pads for Fg f6 4 pot calipers delivery to 2731

Can do DBA T3 and low dust pads from about $690.00
PM me if your interested or would like a quote on another pad.

EBII Ghia · 24-02-2018, 10:12 PM

Hi, A while ago (a few years!) someone asked about Speed bleeders. Were you/are you able to get them? SB1010 (for a Pulsar) was the part number I require x 4. Thanks.

EBII Ghia · 27-02-2018, 11:27 AM

Quote:

Originally Posted by EBII Ghia

Hi, A while ago (a few years!) someone asked about Speed bleeders. Were you/are you able to get them? SB1010 (for a Pulsar) was the part number I require x 4. Thanks.

Dont worry. Bought some on Amazon.

**FLOORED** · 27-02-2018, 04:38 PM

Quote:

Originally Posted by EBII Ghia

Dont worry. Bought some on Amazon.

Sorry for the late reply and i understand you purchased them but i do not carry speed bleeders at all anymore sorry.

ghezzi · 29-10-2018, 10:13 PM

Hope you have a good holiday, just had 3 weeks of myself.

Chasing a firm pedal with short travel on my 2012 FGII ute. Tradie EcoLPi tonner.
Stock steel 16" wheels, bilsteins and braided brake lines. At 270k due for my last machine of the original discs and a new set of stock pads.

Previous BA ute would consume a set of (front) DBA discs and 2 sets of Bendix Metal King pads every 50-60K, and I don't drive the FG any different. Don't know if there was a technical problem with the BA, but I'm keen to keep the stock disc/pad on the FG.

My problem is I hate the long spongy pedal of Aussie made cars, I want the feel of my Brembo equipped motorcycles. Short and firm, but with great feel. So would that require some change in the master cylinder piston size, the brake booster, or the pedal box?

Azgtv6 · 30-10-2018, 04:12 PM

I had this same situation with my 2012 One Tonne
went to a 17 inch territory wheel with xr6 turbo brakes, DBAt3 and Bendix ultimate pads, much better stopping power but high wear and dust.
same pedal feel (long ) and never had complete confidence. after 200k went to a fgx (not 1 tonne )and fitted the brembos and stock pads, bigger front wheels. good pedal feel and stops on a dime regardless of load.
Would be interesting to investigate different master cylinder sizes ( if any available )