|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
22-03-2018, 08:10 AM | #1 | ||
Starter Motor
Join Date: Apr 2005
Posts: 16
|
Hey guys, I'm looking at a MC Mondeo Ecoboost Auto today and was wondering if there is any inherent problems with the gearbox?
I'm a previous owner of a Focus auto and within 30,000 kays had 2 clutches fitted and many visits to the dealership. So I'm concerned about the Ford DCT auto. I know that the gearbox is a wet clutch type and the problematic Focus was a dry clutch. So I'm hoping it would be reliable. The car I'm looking at has 66,000 kays so it's relatively low mileage. Any advice on the gearbox or any other issues that the car may have would be appreciated. |
||
22-03-2018, 02:51 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 805
|
Reliability and service information is privy to Ford,
actual data is not publicly available, poor buggers, they must be struggling. My experience is positive, The bad reputation of powershift works in favour of 2nd hand buyers, since the wet clutch gearboxes are pretty good, I believe. |
||
22-03-2018, 04:57 PM | #3 | ||
Regular Member
Join Date: Dec 2015
Location: Dubbo, formerly Canberra
Posts: 342
|
We only have anecdotal evidence to work with.
The earliest Powershift-equipped MB-MC Mondeos (2010-2011 build) seem to have a defect where an input shaft speed sensor can go bad. It causes the computer to become confused and produce an irregular balking or hesitation in low-speed acceleration (like it spontaneously selects neutral), then often a jolt when it picks back up, and sometimes rough shifts. If you have an OBDII scanner you might see a P0715 "sensor value out of range or implausible" trouble code being recorded in the TCM. Repair can cost from $2,000 to $3,000 and requires complete removal and disassembly of the transmission to replace the part. It seems to be a not-so-uncommon problem, but as said we only have anecdotes. We've seen several posters on these forums reporting this trouble, including users bundybear, manchu and myself going through it throughout 2015 & 16. Reportedly there was a manufacturing changeover around 2012 where Ford started using a redesigned sensor that doesn't go bad. I don't think we've seen anyone report it in 2012-on built vehicles, or had a recurrence in a fixed one. Other than we haven't really heard of too many problems. The transmission fluid is super important and needs to be changed on schedule, if it's not done correctly that will affect gear shifts and drivability, and possibly cause damage. We have one user (ac17) who is currently posting about low-speed shudder and exploring the possibility of clutch failure, but that seems to be an isolated case. They seem to be a pretty strong transmission generally speaking, but expensive to repair if they go wrong. This link I found earlier today that gives a summary reference might be relevant here: https://axleaddict.com/cars/Powershi...mission-Faults If you have concerns going into a purchase, get it checked out and get some kind of mechanical warranty to cover you for the first few months while you get familiar (if you don't have the statutory warranty from buying from a dealer). |
||
22-03-2018, 06:03 PM | #4 | ||
Donating Member
Join Date: May 2008
Posts: 12,799
|
From memory Ford revised the gearbox oil change interval to 60,000km or thereabouts. In which case make sure that has been done or use it as a bargaining tool.
We had an EcoBoost Titanium and had no problems with it. The main thing, as I'm sure you are aware having had a Focus, is that they need to be driven slightly different to regular auto's and CVT's. They don't respond well to heavy, sudden throttle applications from stand still and generally resent on-off-on type throttle usually associated with stop start city driving.
__________________
The Fleet - 2016 PX MK II Ranger Cool White 2008 FG XR6 Sensation Blue 2014 FG X XR8 Emperor Red 2024 Mustang GT Race Red The Departed - 2002 T3 TS50 Blueprint 2017 Mustang GT Race Red |
||
22-03-2018, 06:58 PM | #5 | |||
Regular Member
Join Date: Sep 2013
Location: Queensland
Posts: 80
|
Quote:
__________________
Latest ride: Ford Falcon FG X G6E Fondly remembered: 2013 Ford Mondeo Zetec Ecoboost Hatch |
|||
This user likes this post: |
24-03-2018, 01:03 AM | #6 | |||
Regular Member
Join Date: Mar 2009
Posts: 167
|
Quote:
Laughed today when running late for an appointment and found myself in the left hand lane at the front at a set of lights. Noticed I did not have far to travel after the lights before needing to change lanes. So when the lights changed I took off a bit harder than necessary to beat the car next to me when I heard the squeal of wheel spin. Thought what a hoon it was next to me at the lights. Oops the hoon was me I realised as I changed lanes a mile in front of the other car. Not the nicest driving I know but pleased that my old Mondy (240klms+) still had it in her to respond.
__________________
Cheers Pete Melbourne 2010 Ford Mondeo Zetec TDCi Diesel Colour: Frozen White Last edited by sailaway; 24-03-2018 at 01:06 AM. Reason: Spelling |
|||
28-08-2024, 07:04 PM | #8 | |||
Regular Member
Join Date: Jul 2024
Posts: 48
|
Quote:
I have a 2011 turbo Diesel mondeo. What you described the jolt when car picks up at low speeds usually when turning into a street or entering a round about when i don't need to do a full stop (like it spontaneously selects neutral) happens to my car. Though i never get a code. Also one other symptom, jolt down to second or third gear (can't remember which gear) on down shit. around 35-40km speed feels as if it down shifts to early. All other gear changes are fine. Now if it is my input shaft speed sensor..... what is the major part of the huge cost you mention ($2000 - $3000) is it parts or the trouble pulling the transmission out from the car? Why i ask, i'm about to get another engine put into my car as the current engine has had it. I'm looking around $2000 - $2500 for a second hand engine and labor to remove my current one and place this other second hand one with very low km. Before i commit..... i need to know, A) if this sensor issue would be my issue or something else since no codes come up (according to 1 mechanic its my engine mounts causing that jolt at low speed take offs) though i do feel that momentary neutral before the jolt so i'm taking your word as making more sense. B) since the transmission is coming out anyway with the current engine, the labor cost wouldn't be included in this 2-3k estimation and all i need is the cost of this sensor and i suppose opening up the transmission while its already out. PS: Googling A faulty transmission speed sensor can cause a multitude of problems Faulty cruise control Sluggish shifting Difficult shifting Malfunctioning speedometer Check engine light None of these apply to me. Last edited by JustBill; 28-08-2024 at 07:32 PM. |
|||
Thread Tools | |
Display Modes | |
|