|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
12-01-2014, 09:38 PM
|
#1 | ||
|
Starter Motor
Join Date: Aug 2013
Posts: 8
|
Hi all.
Does anyone know where I might be able to source a replacement gear for my universal power window kit???I was working on it today, and just when I was about to fasten the unit into place, I realised that the gear that sits on the spline of the hand crank (which in turn connects to the power unit) had fallen out and was missing. I searched for ages and could not find it. I need to get a replacement one, if that is at all possible. Thanks. |
||
|
|
|
12-01-2014, 10:48 PM
|
#2 | ||
|
Where to next??
Join Date: Oct 2006
Location: Sydney
Posts: 8,893
|
Is there a company mark or brand on it with a model number? You may be able to contact the company direct and they can send you the part.
Perhaps pop the one off the other side and try matching it. Is there even a place that only sells gears of various sizes? Perhaps scour eBay for the same unit, or better still one with a blown motor you can scavenge for parts. Good luck. You may also try a place that fits after market car accessories, they may have something that's close, or know where to send you.
__________________
___________________________ I've been around the world a couple of times or maybe more....... |
||
|
|
|
|
12-01-2014, 11:01 PM
|
#3 | ||
|
Starter Motor
Join Date: Aug 2013
Posts: 8
|
Hi Yellow_Festiva thanks for the reply.
I have looked on eBay for replacement gears .... To no prevail, I'll have a look at the box and forms inside. I'll see if I can get in touch with them. Perhaps I'll ask around local auto shops. Again thanks |
||
|
|
|
|
12-01-2014, 11:17 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Canberra Region
Posts: 9,037
|
Ive got a set that i pulled out of my ED, post a pic up and we'll see if its the same
__________________
2016 FGX XR8 Sprint, 6speed manual, Kinetic Blue #170 2004 BA wagon RTV project. 1998 EL XR8, Auto, Hot Chilli Red 1993 ED XR6, 5speed, Polynesian Green. 1 of 329. Retired 1968 XT Falcon 500 wagon, 3 on the tree, 3.6L. Patina project. |
||
|
|
|
12-01-2014, 11:26 PM
|
#5 | ||
|
Starter Motor
Join Date: Aug 2013
Posts: 8
|
Hi Xr6 Martin
Just to be sure.... I'm looking for the appropriate gear that attaches to the manual winder spline, and then to the end of the motor. I would not be able to post a picture till the morning. I'll post as soon as I can. Thanks. |
||
|
|
|
|
13-01-2014, 10:18 AM
|
#6 | ||
|
Starter Motor
Join Date: Aug 2013
Posts: 8
|
Hi XR6 Martin
Here are is a photo of the door and the spline. I measured the spline, the OD is 11mm. If this helps, let me know. And if they are a match, how much would you like for the gear/gears?? Cheers Lachlan. |
||
|
|
|
|
13-01-2014, 10:33 AM
|
#7 | ||
|
Starter Motor
Join Date: Aug 2013
Posts: 8
|
I can't believe it ..... I finally found the gear...... It had fallen down under the drivers side seat.
I would just like to say thanks to the both if you for your help. Cheers Lachlan |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Universal power window kit gears
Linear Mode
