|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
|
|
30-01-2014, 08:02 AM
|
#1 | ||
|
Starter Motor
Join Date: Jan 2014
Posts: 10
|
Hi All,
Am in Central Vic, trying to source both a bit of info as well as hard to get bits and pieces for 1968 F350 trady's wagon. Am currently in the midst of a project where I am either trying to locate original parts, or alternatively, adapt parts from another Ford product. Going through the clutch and brake rebuild at the moment, found that the nylon bushes in the clutch/brake pedal pivot up under the dash within the pedestal, are simply flogged out. Also the clutch return spring rests on two small nylon saddles , probably to stop them rattling. Tried a few local places, all I seem to get is blank looks. A mate suggested that it's quite possible that another Ford product may have used the same set up. Probably going to need quite a few fiddly bits like these in the near future. Can anyone direct me to either a Ford F truck parts supplier, or a hard-to-get general Ford replacement dealer? Would be appreciated, not real brilliant on doing searches on the internet, but if I get a heads up, should be able to direct my queries. Thanks for any help, Cheers, Dave 64 |
||
|
|
|
30-01-2014, 01:49 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2005
Location: Victoria, The no fun state
Posts: 1,668
|
Hey dave try eagle auto parts in dandenong they specialize in parts for old yank stuff also theres a bloke in thomastown who specializes in early f trucks I beleive the bushes in the pedal box are same as our falcon's just pull the bushes ut and go to a local parts shop and measure them up that's what we used to do at auto brake service I know transit vans had same size bushings as some falc's or corty's so try this method
92 South Gippsland HWY Dandenong 3175 Phone: 03 8710 3000 Mon - Fri 8:30am - 5.30pm Sat 9am - 1pm also try this site it's for f truck parts in australia http://www.ftrucksaustralia.com/ |
||
|
|
|
| This user likes this post: |
|
30-01-2014, 02:51 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
If you can't get the bushes some bearing places sell nylon in stick and you could make some yourself.
|
||
|
|
|
|
30-01-2014, 08:05 PM
|
#4 | ||
|
Starter Motor
Join Date: Jan 2014
Posts: 10
|
Thanks, Guys.
Local Ford dealer went out of his way on his own time to locate one half a set of nylon bushes. Way too thin to try and machine nylon, but got hold of two bronze bushes and will machine the eye of the pedal out to suit, then ream it. Don't know about the anti-rattle saddles on the end of the clutch pedal return spring, again may have to try and adapt something else. Dave64 |
||
|
|
|
| This user likes this post: |
|
31-01-2014, 07:31 AM
|
#5 | ||
|
Lyminge, Shepway, Kent
Join Date: Oct 2008
Location: Geelong - Go Cats
Posts: 3,197
|
There is F series wrecker near Geelong. http://www.westcoastf100.com.au/
__________________
Mel Brooks sums it up best; "Comedy is when you fall into an open sewer and die, tragedy is when I get a paper cut" |
||
|
|
|
| This user likes this post: |
General Query
Hybrid Mode