DB1353 Pads

dc_todd · 12-12-2013, 11:44 PM

Hi Matt,

Just wondering what you have in this pad size? I am running SRT's right now, but the dust is a killer. Top pad none the less. Time to start looking at replacing them though. Just wondering what you have and what prices.

Ball park is fine.

Also while on topic in a round about way.

Rotors to suit 1999 TE50? 330mm.

Again, what and how much.

Forget the cheap stuff, give me mid range and up without going all out on the premo gear.

I hope I have made sense.

I am currently running the elliptical grooved rotors that I got off you a few years ago. I've had no issues with them.

Dave

**FLOORED** · 16-12-2013, 09:17 AM

Quote:

Originally Posted by dc_todd

Hi Matt,

Just wondering what you have in this pad size? I am running SRT's right now, but the dust is a killer. Top pad none the less. Time to start looking at replacing them though. Just wondering what you have and what prices.

Ball park is fine.

Also while on topic in a round about way.

Rotors to suit 1999 TE50? 330mm.

Again, what and how much.

Forget the cheap stuff, give me mid range and up without going all out on the premo gear.

I hope I have made sense.

I am currently running the elliptical grooved rotors that I got off you a few years ago. I've had no issues with them.

Dave

Dave are you running SRT pads just for street use or track as well? Hawk performance brake pads would be fine for street use but will not have the initial bite you may be used to which is the offset for low dust pads.
DBA T3 slotted are $245 each and are good.