|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
16-01-2008, 03:19 PM
|
#1 | ||
|
Starter Motor
Join Date: Jan 2008
Posts: 16
|
Gday all,
Im interested in buying a set of Weld Racing wheels for my 69 Capri GT. I know the bolt pattern is correct (108x4) but will these wheels actually fit in my standard capri? The fronts are 15x7 and the rears are 15x8. Are they too wide, or will i have to lip the guards? Any help would be greatly appreciated. Cheers, Matty |
||
|
|
|
17-01-2008, 08:17 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2005
Posts: 556
|
Its difficult to say without knowing tyre size. I have a set of 15x7s with 195/60 front and 225/60 rears and they scrape on an Escort. I haven't try them on my Capri, but I'd image they'd scrape as my car sits low. I run 14x6s superlites with 195/60s and they are fine. I'd say you'd need to go with some very low-profile tyres (like 50/55s) and keep the widths below 205.
|
||
|
|
|
Will these wheels fit my Capri?
Hybrid Mode