Genuine Ford Parts

[GTLEGEND]

Originally Posted by gpierce

It looks to me like the hose is part of the filler assembly in that pic and not separate (circled in my pic below). Good work Ford! What are they thinking. So yes 9034. Also is there a part number for the vent hose that goes to the tank (also circled)

Thanks!

Pic with circled parts:

https://ibb.co/bvyRYWH


Sent from my iPhone using Tapatalk

So for 9034 you have a choice of two, one for tub/body vehicle and one for tray/cab chassis vehicles, which one do you need?

As for the vent hose, no part number, looks like part of the tank only. Still available though.

GT

[gpierce]

Originally Posted by GTLEGEND

So for 9034 you have a choice of two, one for tub/body vehicle and one for tray/cab chassis vehicles, which one do you need?

As for the vent hose, no part number, looks like part of the tank only. Still available though.

GT

Tub please and how much for the tank (I think it will hurt)


Sent from my iPhone using Tapatalk

[GTLEGEND]

Originally Posted by gpierce

Tub please and how much for the tank (I think it will hurt)


Sent from my iPhone using Tapatalk

Neck is $60 plus postage if need be. Tank $850 plus freight if need be also.

[gpierce]

Surprisingly reasonable on the filler tube. I have a fuel smell on hot days and I need to take it apart to first to see if that hose is bad. Doesn’t look it from the outside but never know. Will be in touch if I need it.


Sent from my iPhone using Tapatalk

[gpierce]

Hi GT. Are you able to confirm FG doors are the same part for Sedan and Ute? Pretty sure just the outer trim is different but the door shell is the same.


Sent from my iPhone using Tapatalk

[GTLEGEND]

Originally Posted by gpierce

Hi GT. Are you able to confirm FG doors are the same part for Sedan and Ute? Pretty sure just the outer trim is different but the door shell is the same.


Sent from my iPhone using Tapatalk

Hey mate, yes front door body/skins are the same between sedan and ute.

[mad2]

Hi Legend


just want to confirm what loom is fitted to a BA XR6 [2004 - VIN 6FPAAAJGSW4D41745]




Thanks GT


Ps. was fitted with a premium ICC possibly S/Z and it does have the connection for the sunlight sensor. so i'm 'presuming' High class?.

[GTLEGEND]

Originally Posted by mad2

Hi Legend


just want to confirm what loom is fitted to a BA XR6 [2004 - VIN 6FPAAAJGSW4D41745]

image


Thanks GT


Ps. was fitted with a premium ICC possibly S/Z and it does have the connection for the sunlight sensor. so i'm 'presuming' High class?.

The catalogue unfortunately does not drill down to the exact loom for that VIN, it gives a choice of three options.

The pic of the part number you have are for cars with:

WIRING ASSY - INSTRUMENT PANEL, WITH AUDIO PEP PACK (4 DOOR SALOON, FAIRMONT/XR, LESS NAVIGATION SYSTEM OR GT/GT-P)

The other two choices are:

WIRING ASSY - INSTRUMENT PANEL, LESS AUDIO PEP PACK (4 DOOR SALOON, XR, LESS NAVIGATION SYSTEM)

or

WIRING ASSY - INSTRUMENT PANEL, WITH AUDIO PEP PACK, WITH CORNERING LAMP (4 DOOR SALOON, XT/FUTURA/XR/FAIRMONT, WITH NAVIGATION SYSTEM OR GT/GT-P OR F6)

[mad2]

Originally Posted by GTLEGEND

The catalogue unfortunately does not drill down to the exact loom for that VIN, it gives a choice of three options.

The pic of the part number you have are for cars with:

WIRING ASSY - INSTRUMENT PANEL, WITH AUDIO PEP PACK (4 DOOR SALOON, FAIRMONT/XR, LESS NAVIGATION SYSTEM OR GT/GT-P)

The other two choices are:

WIRING ASSY - INSTRUMENT PANEL, LESS AUDIO PEP PACK (4 DOOR SALOON, XR, LESS NAVIGATION SYSTEM)

or

WIRING ASSY - INSTRUMENT PANEL, WITH AUDIO PEP PACK, WITH CORNERING LAMP (4 DOOR SALOON, XT/FUTURA/XR/FAIRMONT, WITH NAVIGATION SYSTEM OR GT/GT-P OR F6)

Thanks GT

it was worth an ask. well i think we can rule out

WIRING ASSY - INSTRUMENT PANEL, WITH AUDIO PEP PACK, WITH CORNERING LAMP (4 DOOR SALOON, XT/FUTURA/XR/FAIRMONT, WITH NAVIGATION SYSTEM OR GT/GT-P OR F6)

as i'm pretty sure the cornering lights won't fit the XR front. it def had the premium sound & the sunlight sensor wiring [altho taped up under dash] & rear parcel cover ....... but that 'may have' been retro fitted .... who knows.

thanks for the reply.

[crmpicco]

Hello again GTLEGEND,

Would you happen to have a glove box latch for a 2013 Ford Falcon FG MK2 XR6? russellw has pointed me in your direction on this thread

https://www.fordforums.com.au/showthread.php?t=11502386

The part number he has provided is BAF F06004 A1 LATCH

Many thanks

[GTLEGEND]

Originally Posted by crmpicco

Hello again GTLEGEND,

Would you happen to have a glove box latch for a 2013 Ford Falcon FG MK2 XR6? russellw has pointed me in your direction on this thread

https://www.fordforums.com.au/showthread.php?t=11502386

The part number he has provided is BAF F06004 A1 LATCH

Many thanks

Hi mate,

Should be able to get one, Warm Charcoal for $100 plus postage. If its Cashmere colour, then we need to do some searching.

It does not come with a lock. If you need a lock also, that is $35 extra.

Happy to organise for you if need be.

[Neme]

I don't suppose they still make OEM brake master cylinders for AU's?

Specifically 2002 AU3 XR8 manual if there's any difference

[GTLEGEND]

Originally Posted by Neme

I don't suppose they still make OEM brake master cylinders for AU's?

Specifically 2002 AU3 XR8 manual if there's any difference

There are around 6 different brake Master Cylinders in the AU/AU3 range, unfortunately no longer available from Ford.

You may find some at some brake specialists as they were made by PBR.

[bondy99]

G'day GT,

I was replacing the brake light and indicator light on the rear of the AU2 tail light assembly.

Ford AU2 6 Cylinder Year 2000 sedan.

I noticed one of the bulb holders that twists onto the tail light to secure it has one of the locking piece broken off.

Are these still available?

If not are there any other types that would be suitable?

Thanks

[aussiblue]

If not are there any other types that would be suitable?

There are this type https://www.ebay.com.au/itm/33310692...Bk9SR4isgpnnZA and https://www.ebay.com.au/itm/29206571...Bk9SR4isgpnnZA Supercheap can get them too: https://www.supercheapauto.com.au/p/...=en_AU&start=2

[GTLEGEND]

Originally Posted by bondy99

G'day GT,

I was replacing the brake light and indicator light on the rear of the AU2 tail light assembly.

Ford AU2 6 Cylinder Year 2000 sedan.

I noticed one of the bulb holders that twists onto the tail light to secure it has one of the locking piece broken off.

Are these still available?

If not are there any other types that would be suitable?

Thanks

Original was ER13N454A, no longer available. Aussieblue has the aftermarket ones covered!

[78xcgxl]

Hi Gtlegend,

Can you still get FGX silver cruise control buttons if so what's the part no? Thanks

[GTLEGEND]

Originally Posted by 78xcgxl

Hi Gtlegend,

Can you still get FGX silver cruise control buttons if so what's the part no? Thanks

Hey there,

Yes believe you can, part number ER2Z9C888CA.

Can help you get if need be around the $200 mark plus postage if required.

[crmpicco]

Originally Posted by GTLEGEND

Hi mate,

Should be able to get one, Warm Charcoal for $100 plus postage. If its Cashmere colour, then we need to do some searching.

It does not come with a lock. If you need a lock also, that is $35 extra.

Happy to organise for you if need be.

Thanks for the offer mate. I’ve ended up gambling with a second hand glove box with latch off eBay. It looks fine and was $80 delivered so hopefully that turns up soon and does the job. If not I’ll be back in touch.

[Blue_XR]

Hi GTLegend,

I was wondering if there is any new stock floating around for a BF Handbrake cover in black? I'd also look at taking a leather one depending on what's available.

Thanks

[GTLEGEND]

Originally Posted by Blue_XR

Hi GTLegend,

I was wondering if there is any new stock floating around for a BF Handbrake cover in black? I'd also look at taking a leather one depending on what's available.

Thanks

Hi mate,

There were 5 different hand brake covers on BA/BF's, unfortunately none available through parts, you will need to search on line in the usual places but the below may be of help.

BA2760B1: Warm Charcoal Vinyl

BA2760B6D: Dark Stone Vinyl

BA2760F1: Warm Charcoal Leather

BA2760F6D: Dark Stone Leather

BA2760C1: Black Bench Seat

GT

[Blue_XR]

Originally Posted by GTLEGEND

Hi mate,

There were 5 different hand brake covers on BA/BF's, unfortunately none available through parts, you will need to search on line in the usual places but the below may be of help.

BA2760B1: Warm Charcoal Vinyl

BA2760B6D: Dark Stone Vinyl

BA2760F1: Warm Charcoal Leather

BA2760F6D: Dark Stone Leather

BA2760C1: Black Bench Seat

GT

Thanks so much for checking. I’ll start searching for a good second hand one, I was hopeful there might be a new one out there somewhere.

[FoxtrotGolfXray 5.0]

G'day gt, finally getting around to getting a few little niggles in the ute sorted. After a P&A for the following, please:

* a brake light switch
* single gang window switch for the passenger side, and
* this little clip. Found on the rear, outboard side of the door card. Passenger side was OK, drivers side not so good. Suspect I'll need to get multiples, but happy to see what, if anything, you can come up either.



All to suit a 2013 fgii ecolpi ute, vin 6FPAAAJGCMDM28719

Postage to 3850, please.

Sing out if you need any further info.

Thanks for your assistance.

[GTLEGEND]

Originally Posted by FoxtrotGolfXray 5.0

G'day gt, finally getting around to getting a few little niggles in the ute sorted. After a P&A for the following, please:

* a brake light switch
* single gang window switch for the passenger side, and
* this little clip. Found on the rear, outboard side of the door card. Passenger side was OK, drivers side not so good. Suspect I'll need to get multiples, but happy to see what, if anything, you can come up either.

image

All to suit a 2013 fgii ecolpi ute, vin 6FPAAAJGCMDM28719

Postage to 3850, please.

Sing out if you need any further info.

Thanks for your assistance.

Hey mate,

Brake switch: Available $35

LHS door window switch: Available $39

Door trim clip: I have to check as there are two possible clips that the drawing is not really clear about. Either way they are $4 each.

Postage would be $11 for one or all of the items.

Get back to you on the clip.

GT

[FoxtrotGolfXray 5.0]

Thanks gt. I'll take one of each, either with or without the clip, depending on what you find, please.

I'll pm you my address.

Cheers.

[Blue_XR]

Hi GT legend,
Is it possible to get a factory rear parking sensor kit (including wiring and modules) for a BF Falcon?