Genuine Ford Parts

[CheerXR8]

Hi I am looking for a Air conditioning pump for a 1994 XR8 Sprint am waiting for mechanic to send Part number
Thank you

[GTLEGEND]

Originally Posted by gonads

Hey Legend,

I’m happy to go ahead with the driver’s door window switch assembly. Let me know how to fix you up, including postage to Orange, NSW, 2800.

Cheers,
Ben

Hey Ben,

Please send me a PM and we can organise.

GT

[GTLEGEND]

Originally Posted by CheerXR8

Hi I am looking for a Air conditioning pump for a 1994 XR8 Sprint am waiting for mechanic to send Part number
Thank you

Original part number was EL19D629B, long obsolete. Are you looking for genuine or aftermarket or does not matter?

[XR Martin]

Pretty sure they are rebuildable (AC pump)
Weren't they a Denso unit?

[GTLEGEND]

Originally Posted by XR Martin

Pretty sure they are rebuildable (AC pump)
Weren't they a Denso unit?

No Sanden, maybe back in the day you could rebuild, now a days pretty much all you can change is the front seal and even that's not guaranteed to fix!

[CheerXR8]

Originally Posted by GTLEGEND

Original part number was EL19D629B, long obsolete. Are you looking for genuine or aftermarket or does not matter?

It would be nice to get genuine but after market is just as good our Mechanic cannot find anything on their database in NZ

[GTLEGEND]

Originally Posted by CheerXR8

It would be nice to get genuine but after market is just as good our Mechanic cannot find anything on their database in NZ

Can get you an aftermarket OEX brand one for $520 AUD plus freight (no idea on how much to NZ that would be)?

[FGX008]

Hi Legend

A long story and probably a difficult part to get, but Im after a left hand cylinder head for a 2016 FGX XR8 please. Everyone I have spoken too is telling there are no spare cylinder heads in Australia for the Miami engines. I hoping you can put me in the right direction where I can buy one or do I need to order from the US?

Cheers, Brent

[GTLEGEND]

Originally Posted by FGX008

Hi Legend

A long story and probably a difficult part to get, but Im after a left hand cylinder head for a 2016 FGX XR8 please. Everyone I have spoken too is telling there are no spare cylinder heads in Australia for the Miami engines. I hoping you can put me in the right direction where I can buy one or do I need to order from the US?

Cheers, Brent

Hi Brent,

I can source a 5.0L V8 Cylinder LH head NOS for $2800 plus freight if need be. Not sure who told you that they were not available, but there is still a handful around.

If you want my assistance PM me to discuss.

Cheers,
GT

[FGX008]

Originally Posted by GTLEGEND

Hi Brent,

I can source a 5.0L V8 Cylinder LH head NOS for $2800 plus freight if need be. Not sure who told you that they were not available, but there is still a handful around.

If you want my assistance PM me to discuss.

Cheers,
GT

Hi Legend

I just sent you a PM.

Cheers, Brent

[GTLEGEND]

Originally Posted by FGX008

Hi Legend

I just sent you a PM.

Cheers, Brent

Hey Brent,

No PM received, check your sent box to see if it actually sent or if you sent it to the right person?

[FGX008]

Originally Posted by GTLEGEND

Hey Brent,

No PM received, check your sent box to see if it actually sent or if you sent it to the right person?

Thanks Legend

I dont know what I did wrong, but I have sent another PM to you. Yes
please, I would appreciate your assistance.

Cheers, Brent

[xr6-FTW]

Hey GT does ford still supply new BA/BF power steering pumps? If they don’t would you have any idea what the best replacement would be suited to it? If unsure all good boss.

[GTLEGEND]

Originally Posted by xr6-FTW

Hey GT does ford still supply new BA/BF power steering pumps? If they don’t would you have any idea what the best replacement would be suited to it? If unsure all good boss.

Hey mate,

Genuine power steer pumps for BA/F series are no longer available from Ford assuming you are referring to 4.0 6 cyl.

You can get exchange reconditioned units from Repco or the alike or from power steering specialists like Active Power Steering etc.

https://www.repco.com.au/parts-servi...EERING%2BPUMP#

https://www.activepowersteering.com.au/distributors

[mad2]

Hi GT


question time re steering rack boots.

are the BA/BF boots the same as the SX/SY steering rack boots?.


Thanks

[GTLEGEND]

Originally Posted by mad2

Hi GT


question time re steering rack boots.

are the BA/BF boots the same as the SX/SY steering rack boots?.


Thanks

Interesting one that I really cannot answer directly as BA BF you can buy the boot separate, in SX SY you can only get the boot as part of the inner tie rod kit, so hard to tell. The inner tie rod kit for BA BF is different but I am not sure if its because of the boot or the rod??

Guess only the way to really tell is to put them side by side.

Sorry cant answer it correctly.

[mad2]

that's ok GT

i'll work it out and let you know .. cheers

[mad2]

Originally Posted by GTLEGEND

No worries about the AWD badges, when your ready if so, just dont leave it too long as Falcon/Territory new parts are getting thin on the ground.

Can get that centre cap, they are $50 each.

Cheers,
GT

Hi GT.

with the centre caps i previously mentioned, what length lugs do they have?.



ie - short or long?.


Thank you.

[GTLEGEND]

Originally Posted by mad2

Hi GT.

with the centre caps i previously mentioned, what length lugs do they have?.

image

ie - short or long?.


Thank you.

If you mean the 5 lugs, they are approx 20mm wide by 15mm high (taken from under the cap lip).

GT

[GTLEGEND]

Originally Posted by xr6-FTW

Hey GT does ford still supply new BA/BF power steering pumps? If they don’t would you have any idea what the best replacement would be suited to it? If unsure all good boss.

Hi mate,

I have come across a brand new NOS genuine Ford BA BF 6 cylinder power steer pump if your interested.

GT

[aussiblue]

Hi GT Legend. Per https://fordforums.com.au/showthread.php?t=11500093 , it looks like I need new concentric slave cylinder for my late 2013 XR6 MKII FG Manual 6 speed ute. Can you please advise on the price and availability of the genuine Ford item?

[T3rminator]

Hi GT, does ford still have the evap vac hose with the quick connect that runs from the back of the manifold to the evap switch?

Car is a 04 Falcon 5.4L 24v Barra 220.

[GTLEGEND]

Originally Posted by aussiblue

Hi GT Legend. Per https://fordforums.com.au/showthread.php?t=11500093 , it looks like I need new concentric slave cylinder for my late 2013 XR6 MKII FG Manual 6 speed ute. Can you please advise on the price and availability of the genuine Ford item?

I answered your question in that thread, is that enough?

[DJM83]

Chasing a set of bonnet struts for a 2001 MKII BF Ute.

[GTLEGEND]

Originally Posted by T3rminator

Hi GT, does ford still have the evap vac hose with the quick connect that runs from the back of the manifold to the evap switch?

Car is a 04 Falcon 5.4L 24v Barra 220.

Hey mate,

Are you referring to any of the parts in pic below?

BA BF V8 24V Vacuum Hose.png

[GTLEGEND]

Originally Posted by DJM83

Chasing a set of bonnet struts for a 2001 MKII BF Ute.

Is it a BF MK2 as 2001 is AU3?

I need to confirm should be able to get for you I think they are around $70 each but again need to confirm. If you are interested let me know and I will need to chase.

GT

[DJM83]

Originally Posted by GTLEGEND

Is it a BF MK2 as 2001 is AU3?

I need to confirm should be able to get for you I think they are around $70 each but again need to confirm. If you are interested let me know and I will need to chase.

GT

Sorry mate 2007 BF MKII, not 2001.

[T3rminator]

Originally Posted by gtlegend

hey mate,



are you referring to any of the parts in pic below?



Attachment 107037

9d661

[GTLEGEND]

Originally Posted by T3rminator

9d661

Sorry that part has a part number of BA9D661A, obsolete and long gone unfortunately.

[mad2]

Originally Posted by GTLEGEND

Interesting one that I really cannot answer directly as BA BF you can buy the boot separate, in SX SY you can only get the boot as part of the inner tie rod kit, so hard to tell. The inner tie rod kit for BA BF is different but I am not sure if its because of the boot or the rod??

Guess only the way to really tell is to put them side by side.

Sorry cant answer it correctly.

Hi GT. as promised a pic of BA/BF & SX/SY steering rack boots. aftermarket tho.






hope that helps someone out.

GTLegend -

The inner tie rod kit for BA BF is different but I am not sure if its because of the boot or the rod??

it 'appears' to be the rod.


cheers