Genuine Ford Parts - Page 51

Vicusj · 29-06-2023, 01:21 PM

Quote:

Originally Posted by GTLEGEND

Finally got the clips, just making sure these are what your looking for.

Attachment 106524

How many do you need if so?

GT

Massive shout out to GT

I have received these pesky little clips you shipped to me, and they are spot on what I needed. Really appreciate your help, and all the effort on your end, especially for something so small

Thank you heaps, Legend!

**BFIIGhiaZF6** · 30-06-2023, 09:04 AM

Hi GT, the return spring in my ignition broke yesterday, have a BF3 column enroute to me, could you please source a BF3 to BF2 jump loom for me?

GTLEGEND · 30-06-2023, 11:59 AM

Quote:

Originally Posted by BFIIGhiaZF6

Hi GT, the return spring in my ignition broke yesterday, have a BF3 column enroute to me, could you please source a BF3 to BF2 jump loom for me?

Hi mate, to be honest I have never heard of such a loom. If someone does it, its not a genuine thing.

I will ask around, but cant help thus far on this one.

Let me know how you go.

**BFIIGhiaZF6** · 30-06-2023, 12:16 PM

Quote:

Originally Posted by GTLEGEND

Hi mate, to be honest I have never heard of such a loom. If someone does it, its not a genuine thing.

I will ask around, but cant help thus far on this one.

Let me know how you go.

Thanks for the quick reply GT

Fortunately Mad2 has the bits, the knowledge and the skills, and has been kind enough to offer to make one up for me

Regards, George

GTLEGEND · 30-06-2023, 01:18 PM

Quote:

Originally Posted by BFIIGhiaZF6

Thanks for the quick reply GT

Fortunately Mad2 has the bits, the knowledge and the skills, and has been kind enough to offer to make one up for me

Regards, George

Thats great, sounded like a custom type of thing..

Hats off to those that do that sort of thing.

GT

crmpicco · 05-07-2023, 12:53 PM

Does anyone know where I can acquire a brand new silver long, thin panel that sits around the door handle as shown in this image? I'm looking for new with no scratches or marks etc.

KRISL · 05-07-2023, 02:29 PM

I'm looking for a brand new no marks fpv 6cd silver facia for the icc

GTLEGEND · 05-07-2023, 09:04 PM

Quote:

Originally Posted by crmpicco

Does anyone know where I can acquire a brand new silver long, thin panel that sits around the door handle as shown in this image? I'm looking for new with no scratches or marks etc.

image

Long gone from Ford, only ebay, Market Place etc.

Part number you need is BGF24184A9SA.

GTLEGEND · 05-07-2023, 09:06 PM

Quote:

Originally Posted by KRISL

I'm looking for a brand new no marks fpv 6cd silver facia for the icc

Try Forum Sponsor ASL on here https://www.aslautomedia.com.au/ or Mister FPV https://www.facebook.com/profile.php?id=100082817877814

crmpicco · 05-07-2023, 11:41 PM

Quote:

Originally Posted by GTLEGEND

Long gone from Ford, only ebay, Market Place etc.

Part number you need is BGF24184A9SA.

That’s a shame. I found this one on eBay but it’s suffering from the same wear and tear as the trim panel I have on at the moment.

https://www.ebay.com.au/itm/25608516...mis&media=COPY

Excuse my ignorance - do you work for Ford?

**GasoLane** · 06-07-2023, 09:08 AM

Quote:

Originally Posted by crmpicco

That’s a shame. I found this one on eBay but it’s suffering from the same wear and tear as the trim panel I have on at the moment.

https://www.ebay.com.au/itm/25608516...mis&media=COPY

Excuse my ignorance - do you work for Ford?

That is a closely guarded secret, if we told you we'd have to shoot you

GTLEGEND · 06-07-2023, 09:17 AM

Excuse my ignorance - do you work for Ford?[/QUOTE]

Lets just say I dabble in Ford stuff..

KRISL · 07-07-2023, 05:53 AM

Thanks, yeah I had tried them but no luck,
Off topic but I'm sure the mk2 fg touch screen on the daughters car has a thin clear plastic like cover on the screen (seemed to be more layers under the trims, doesnt look added on), I also asked them about replacing that but the guy seemed to think it was only a glass screen no other covers, and that would need to be sent in to be replaced,

Quote:

Originally Posted by GTLEGEND

Try Forum Sponsor ASL on here https://www.aslautomedia.com.au/ or Mister FPV https://www.facebook.com/profile.php?id=100082817877814

GTLEGEND · 07-07-2023, 07:39 AM

Quote:

Originally Posted by KRISL

Thanks, yeah I had tried them but no luck,
Off topic but I'm sure the mk2 fg touch screen on the daughters car has a thin clear plastic like cover on the screen (seemed to be more layers under the trims, doesnt look added on), I also asked them about replacing that but the guy seemed to think it was only a glass screen no other covers, and that would need to be sent in to be replaced,

They did come with a plastic cover sheet when brand new that is supposed to be peeled off at pre delivery. Could that have been left on?

GreenGully · 07-07-2023, 10:02 AM

[QUOTE=gassa;6823070]

Quote:

Originally Posted by GTLEGEND

Both sides take 96DA220A20BA, its just screwed on the bracket differently pending on which side.[/QUOT
I have some if interested

Gassa

Just sent you a PM

notNA · 08-07-2023, 12:32 PM

hey happen to have a handbreak boot for fgx, i used to see them online but cant seem to find it anywhere

gpierce · 10-07-2023, 09:50 PM

Quote:

Originally Posted by GTLEGEND

FGX 5.0 V8 Cooling System Components as requested. 3 pages of images:

Attachment 106487

Attachment 106488

Attachment 106489

Just a note on the third mage from this post. Ford must have used an earlier image here because the FGX Miami has a three hole water pump and pulley not 4 as shown. My 2012 Miami has a 4 hole, but my 14 Pursuit and my FGX both have 3.

GTLEGEND · 10-07-2023, 10:18 PM

Quote:

Originally Posted by notNA

hey happen to have a handbreak boot for fgx, i used to see them online but cant seem to find it anywhere

Sorry no I don't have one. There is limited stock of these left and Ford have these on restriction, so to try and get one you need to provide an image of the damaged old one, pic of the car showing VIN etc etc.

GTLEGEND · 10-07-2023, 10:20 PM

Quote:

Originally Posted by gpierce

Just a note on the third mage from this post. Ford must have used an earlier image here because the FGX Miami has a three hole water pump and pulley not 4 as shown. My 2012 Miami has a 4 hole, but my 14 Pursuit and my FGX both have 3.

Ford images are not always true to what they actually look like, it's just a reference to the part in question. When you look it up it actually gives you a choice of three- or four-hole pulley or water pump, so from my understanding they could have either in FGX.

arm79 · 16-07-2023, 01:42 PM

Mr GT,

Just curious on a price and availability for the engine cooling fan resistor on a BF Falcon.

02/06 BF - VIN 6FPAAAJGSW6Y61571

Go ahead... Scare me.

GTLEGEND · 16-07-2023, 02:47 PM

Quote:

Originally Posted by arm79

Mr GT,

Just curious on a price and availability for the engine cooling fan resistor on a BF Falcon.

02/06 BF - VIN 6FPAAAJGSW6Y61571

Go ahead... Scare me.

Hey mate,

So in this case, the VIN does drill down to the right parts of the vehicle. So if I am correct, you should have a single thermo fan? If so there are two types of resistor, one you can buy seperate, or the other you can only buy as part of the whole fan/shroud assembly. The way to tell is by the connector on the resistor. If yours is the one you can buy the resistor, then it is $160. If you have to buy the whole shround then its $500 plus postage.

arm79 · 16-07-2023, 02:56 PM

Quote:

Originally Posted by GTLEGEND

Hey mate,

So in this case, the VIN does drill down to the right parts of the vehicle. So if I am correct, you should have a single thermo fan? If so there are two types of resistor, one you can buy seperate, or the other you can only buy as part of the whole fan/shroud assembly. The way to tell is by the connector on the resistor. If yours is the one you can buy the resistor, then it is $160. If you have to buy the whole shround then its $500 plus postage.

Yep it is a single fan with a removable resistor, so $160.

But... Bloody hell... I said scare me, not give me a coronary.

I'll have to speak to Dad. I'm trying to find a used one from someone with a wrecked fan. But if it doesn't work out I'll come back to you.

Thanks for the info.

FPV 460 · 24-07-2023, 03:04 PM

hi GTL. sorry if u have previous;y answered but can i have a price and availablity for a waterpump on a 2011 gt miami. cheers. also the part number? cheers.

GTLEGEND · 24-07-2023, 04:02 PM

Quote:

Originally Posted by FPV 460

hi GTL. sorry if u have previous;y answered but can i have a price and availablity for a waterpump on a 2011 gt miami. cheers. also the part number? cheers.

Hi Mate,

Part number BR3Z8501H, I have this as obsolete now, but need to double check and confirm and get back to you.

GT

bondy99 · 24-07-2023, 04:35 PM

Hello GT,

Would you know the name of that plate that goes from the bottom of the bumper bar and the bottom of the wheel well that contains the spare tyre and is it still available? Usually has three pop rivets. Thanks

GTLEGEND · 24-07-2023, 05:43 PM

Quote:

Originally Posted by bondy99

Hello GT,

Would you know the name of that plate that goes from the bottom of the bumper bar and the bottom of the wheel well that contains the spare tyre and is it still available? Usually has three pop rivets. Thanks

Hey mate,

Would help a bit if you advise what model and if sedan/ute/wagon etc.

GT

GTLEGEND · 24-07-2023, 05:44 PM

Quote:

Originally Posted by GTLEGEND

Hi Mate,

Part number BR3Z8501H, I have this as obsolete now, but need to double check and confirm and get back to you.

GT

Further to this, confirmed obsolete, but have found a NOS one, they want $300 for it (plus postage).

GT

bondy99 · 24-07-2023, 05:50 PM

Quote:

Originally Posted by GTLEGEND

Hey mate,

Would help a bit if you advise what model and if sedan/ute/wagon etc.

GT

Sorry mate,
AU2 Year Built June 2000, sedan. 6 cyl.

GTLEGEND · 24-07-2023, 06:22 PM

Quote:

Originally Posted by bondy99

Sorry mate,
AU2 Year Built June 2000, sedan. 6 cyl.

Rear bumper retainer: AU217C999A, no longer available.

Rivets: W708979S300 still available.

Cheers,
GT

bondy99 · 24-07-2023, 06:58 PM

Oh ok.
Hmmm, what would be the price on those rivets.
Thanks. Bondy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode