Genuine Ford Parts

[GTLEGEND]

Originally Posted by kcodezd

Hi GT, I am after a Sx, Sy Territory rear tailgate garnish, the part that attaches to the lower part of the glass. Can you advise availability and price delivered to Brisbane.
Thank you.

Hi KCODEZD,

Have a look at the below pic and advise which part you are referring to as there is a trim on the interior and exterior. I will also need to know what model SX/Y you are chasing along with month/year as they differ accordingly or a VIN would make it easier.

SX SY Tailgate Trim.PNG

[kcodezd]

Originally Posted by GTLEGEND

Hi KCODEZD,

Have a look at the below pic and advise which part you are referring to as there is a trim on the interior and exterior. I will also need to know what model SX/Y you are chasing along with month/year as they differ accordingly or a VIN would make it easier.

Attachment 104769

Thanks for getting back so quickly GT. Part nø is 41018 for vin 6FPAAAJGAT9C68748.

[GTLEGEND]

Originally Posted by kcodezd

Thanks for getting back so quickly GT. Part nø is 41018 for vin 6FPAAAJGAT9C68748.

Hi mate, can get that part for $240 + delivery. I have no idea on the cost of freight and it will depend on the size of the box as Aus Post will not take items over 1M long.

I can try to see if I can get the box dimensions and weight and go from there if you are interested..

[kcodezd]

Originally Posted by GTLEGEND

Hi mate, can get that part for $240 + delivery. I have no idea on the cost of freight and it will depend on the size of the box as Aus Post will not take items over 1M long.

I can try to see if I can get the box dimensions and weight and go from there if you are interested..

Thanks Legend. Count me in. Especially if you can keep delivery under $40.

[GTLEGEND]

Originally Posted by kcodezd

Thanks Legend. Count me in. Especially if you can keep delivery under $40.

Ok will try and get an accurate freight quote. I have located one that I can get dimensions off. Let you know sometime tomorrow..

[sadbabyman]

Originally Posted by aussiblue

I have just ordered this sunload sensor from ebay USA https://www.ebay.com/itm/Genuine-For...UAAOSwyDNdt8gm I will let you know here how it goes compatibility wise. I will also test it and pull the old one apart to see what light dependent resistor or similar component it uses. EDIT: Damnation just found it cheaper here: https://www.fordpartsgiant.com/parts...-19e663-a.html AU$85.15 including shipping. Ended up being able to get it there i.e. FordPartsGiant as I was still waiting for a shipping quote from the ebay seller.

Hey I was wondering if there was any update to this?
Thanks

[aussiblue]

Hey I was wondering if there was any update to this?

I had one attempt at removing the old one so I could try fitting the new one but health (recovering from minor surgery) and other issues has delayed any further attempts for the time being. Playing around with the top the dash to get the old one out also made it start working again.

[GTLEGEND]

For YTRY4:

FGX Map Light.PNG

[mad2]

Originally Posted by aussiblue

I had one attempt at removing the old one so I could try fitting the new one but health (recovering from minor surgery) and other issues has delayed any further attempts for the time being. Playing around with the top the dash to get the old one out also made it start working again.

easier to get out of a Terri than the Falcon.

[GTLEGEND]

For SJG66..

AU V8 Power Steering.pdf

[T3rminator]

Hey GT Legend,

Whats the cost for a OEM front crankshaft oil seal for a 2004 BA MK2 Falcon, 5.4L 3v, barra 220?

Thanks.

[GTLEGEND]

Originally Posted by T3rminator

Hey GT Legend,

Whats the cost for a OEM front crankshaft oil seal for a 2004 BA MK2 Falcon, 5.4L 3v, barra 220?

Thanks.

Hi mate,

The front crank seal in the timing case is the same for both 3V and 4V V8 engines.

$50 plus freight if required.

GT

[sadbabyman]

Hey mate, was looking for the two bolts that mount the air intake box to the sheet metal just underneath the pcm. Car is a 08/2011 FG petrol NA 6cyl manual sedan

I was also curious if genuine sets/kits/assemblys of screws/bolts exist for sale from ford? Things like the radiator shrouds, lower air deflector and other plastic exterior parts that use metal screws or plastic scrivets. I'm not after specific ones as of yet just looking for a convenient solution if it exists.

Thanks mate

[T3rminator]

Originally Posted by GTLEGEND

Hi mate,



The front crank seal in the timing case is the same for both 3V and 4V V8 engines.



$50 plus freight if required.



GT

PM sent.

[GTLEGEND]

Originally Posted by sadbabyman

Hey mate, was looking for the two bolts that mount the air intake box to the sheet metal just underneath the pcm. Car is a 08/2011 FG petrol NA 6cyl manual sedan

I was also curious if genuine sets/kits/assemblys of screws/bolts exist for sale from ford? Things like the radiator shrouds, lower air deflector and other plastic exterior parts that use metal screws or plastic scrivets. I'm not after specific ones as of yet just looking for a convenient solution if it exists.

Thanks mate

Hi Mate,

Have a look at the image below, believe you are referring to bolt labeled HS1. They are $3 each plus postage if required.

Ford do not do fastener kits, you have to buy each individual one bu one unfortunately.

FG Air Cleaner 4.0 NA.PNG

Cheers

[GTLEGEND]

Originally Posted by TURBO_GHIA

*

*Re: Genuine Ford Parts

Quote:

Originally Posted by*GTLEGEND*

Hi,

Set of rear door glass hinges would be $250 including freight, how ever there is only RHS available at this point in time, the LHS wont be available until April/May next year due to the COVID lockdown where the manufacturer has been closed all this time.

Any update on these ?

First batch of hinges are now available, unsure what the back log of orders are so they have either all sold out again until the next batch arrive or there are a few still left available. Hopefully not too long before there is constant supply.

[YTRY4]

Hey GT,
Do you know the part number and rough cost for an fgx xr6 turbo drivers side(fuse box) engine loom?

I know the FG mk2 was BR29-14K011-ke/BR29-14K011-kc part number I believe.

[GTLEGEND]

Originally Posted by YTRY4

Hey GT,
Do you know the part number and rough cost for an fgx xr6 turbo drivers side(fuse box) engine loom?

I know the FG mk2 was BR29-14K011-ke/BR29-14K011-kc part number I believe.

In FG2 the part numbers you list for that loom is one of about 40 different part numbers for that same part.

In FGX there are 14 different part numbers for that part. Maybe a VIN would narrow it down to the correct one you are after.

For turbo from what I can see it will either be ER2Z14K011JB or ER2Z14K011KB. The JB is $390 and the KB is obsolete.

Need a bit more information to clarify..

GT

[YTRY4]

Originally Posted by GTLEGEND

In FG2 the part numbers you list for that loom is one of about 40 different part numbers for that same part.

In FGX there are 14 different part numbers for that part. Maybe a VIN would narrow it down to the correct one you are after.

For turbo from what I can see it will either be ER2Z14K011JB or ER2Z14K011KB. The JB is $390 and the KB is obsolete.

Need a bit more information to clarify..

GT

Darn, that is just a part number I found on eBay for an fg mk2 turbo loom being sold.

I don’t have a specific vin as it’s part of a conversion process to go from FGX G6e to FGX g6e turbo, I specifically have been trying to find the entire fuse box loom from an fgx turbo automatic car to save me cutting into the original engine loom.

I need the turbo automatic engine loom on the drivers side(including fuse box) as it has the boost solenoid loom section attached and the correct wiring loom to dual thermo fans compared to the NA FGX being a single fan.

[GTLEGEND]

Originally Posted by YTRY4

Darn, that is just a part number I found on eBay for an fg mk2 turbo loom being sold.

I don’t have a specific vin as it’s part of a conversion process to go from FGX G6e to FGX g6e turbo, I specifically have been trying to find the entire fuse box loom from an fgx turbo automatic car to save me cutting into the original engine loom.

I need the turbo automatic engine loom on the drivers side(including fuse box) as it has the boost solenoid loom section attached and the correct wiring loom to dual thermo fans compared to the NA FGX being a single fan.

Part Descriptions:

JB: WIRING - ENGINE CHARGE TEMP. SENSOR (4.0 DOHC PETROL EFI TURBO 24V VCT, HIGH FRONT LAMPS W/SIGNATURE DTRL)

KB: WIRING - ENGINE CHARGE TEMP. SENSOR (4.0 DOHC PETROL EFI TURBO 24V VCT, WITH QUAD HEADLAMPS)

These are the only two where turbo engine is mentioned.

[GTLEGEND]

FGX Fuse Box Loom.PNG

[Bossxr8]

Originally Posted by GTLEGEND

Part Descriptions:

JB: WIRING - ENGINE CHARGE TEMP. SENSOR (4.0 DOHC PETROL EFI TURBO 24V VCT, HIGH FRONT LAMPS W/SIGNATURE DTRL)

KB: WIRING - ENGINE CHARGE TEMP. SENSOR (4.0 DOHC PETROL EFI TURBO 24V VCT, WITH QUAD HEADLAMPS)

These are the only two where turbo engine is mentioned.

Ones XR and the other G6ET?

[arm79]

Mr GT,

You mentioned in another post you might be able to source the BA/BF handbrake TSB service kit BA22K068AK1T.

If you can, let me know and a price for it. If its a headache to do I'll get that ebay one you found. But I'd rather get from a forum source if it works out.

[GTLEGEND]

Originally Posted by arm79

Mr GT,

You mentioned in another post you might be able to source the BA/BF handbrake TSB service kit BA22K068AK1T.

If you can, let me know and a price for it. If its a headache to do I'll get that ebay one you found. But I'd rather get from a forum source if it works out.

Hi mate,

Yes I actually have a NOS one here left over from old bits and pieces I had collected for an old car I no longer have.

$20 plus postage is what it is worth and its not an issue to send if you want it.

Let me know GT.

[arm79]

Originally Posted by GTLEGEND

Hi mate,

Yes I actually have a NOS one here left over from old bits and pieces I had collected for an old car I no longer have.

$20 plus postage is what it is worth and its not an issue to send if you want it.

Let me know GT.

If are willing to part with it I'm more than willing to give it a new home.

I'm only really interested in the springs, so as long as they are good then I am happy.

I have to rush to Dad's workshop to help him out with a problem. Maybe drop me a PM with payment details and whatever and I'll fix it up when I get home tonight.

Thanks for that.

[adz193]

Hey GT, i'm after full black FGX sedan carpet if possible... My clutch pedal has worn a nice hole right through it, and presuming like most it's all one piece?

[GTLEGEND]

Originally Posted by adz193

Hey GT, i'm after full black FGX sedan carpet if possible... My clutch pedal has worn a nice hole right through it, and presuming like most it's all one piece?

Yes all one piece. There are two different styles pending on what vehicle you have cut pile or non cut pile. Due to its size the savingson the discount may be outweighed by the cost of freight.

Happy to assist if need be, but it may be cheaper in this case to buy local to you in Vic based on the size of the item.

Let me know if you still want me to chase..will need a VIN if so.

[arm79]

GT,

The handbrake spring kit arrived safely, thank you very much.

Just curious, it came with 2 sets of those retaining plates. You also get 2 plates per side when you buy an aftermarket shoe kit. But you only need one plate... Is there a reason why they supply 2 per side?

I was also after a price and availability for a BF XR 17" wheel centre cap. Are they NLA or obscenely expensive?

Found out yesterday the previous owner glued one with broken tabs to the wheel and another is missing the steel tension ring, so its just ready to fall out. Will see if Dad wants to spruce up his sh*tbox.

[GTLEGEND]

Originally Posted by arm79

GT,

The handbrake spring kit arrived safely, thank you very much.

Just curious, it came with 2 sets of those retaining plates. You also get 2 plates per side when you buy an aftermarket shoe kit. But you only need one plate... Is there a reason why they supply 2 per side?

I was also after a price and availability for a BF XR 17" wheel centre cap. Are they NLA or obscenely expensive?

Found out yesterday the previous owner glued one with broken tabs to the wheel and another is missing the steel tension ring, so its just ready to fall out. Will see if Dad wants to spruce up his sh*tbox.

Hey mate,

When looking for the brake spring kit I found an extra two plates so I thought I would just give them to you as you may have better use for them then me, so it was a bit of a bonus for you. The kit only normally comes with two plates and two springs.

There are a few different centre caps available for BF 17" wheels, I think the correct ones you need are around $35 each, but to be sure can you get me the engineering number off the back of it and then I can confirm.

GT

[arm79]

Originally Posted by GTLEGEND

Hey mate,

When looking for the brake spring kit I found an extra two plates so I thought I would just give them to you as you may have better use for them then me, so it was a bit of a bonus for you. The kit only normally comes with two plates and two springs.

There are a few different centre caps available for BF 17" wheels, I think the correct ones you need are around $35 each, but to be sure can you get me the engineering number off the back of it and then I can confirm.

GT

Thanks. I appreciate the bonus. I used the others to help clamp stuff on another project when I was cutting and hammering. I bent those ones, so now I have some new ones.

I'll get the number when Dad gets home.