Genuine Ford Parts

[GTLEGEND]

Originally Posted by crmpicco

Hi again mate, it’s a 4.0 L Falcon FG MK2 XR6 and it’s the pressure hose which I understand to be the pricey one. I have called the local Ford dealership here in Rockingham and they have said there is no availability showing and they will need to contact their distributor up in Welshpool near Perth.

Do you have any availability of this part?

I should be able to get the power steer hose, its around $350 plus postage which at a guess is around $20, but not sure. Just need to confirm next week if you are interested.

GT

[crmpicco]

Originally Posted by GTLEGEND

Sedan and ute have the same bottle, how ever FG1 is different to FG2 and FGX (the later 2 are the same) so if it is an FG1 style it wont fit your car being an FG2.

Is FG2 the same as FG MK2? If so, that’s what I have. Also, I’m slightly confused because the description of the item says it fits FGX until 2016. What do you think?

Item Details

Make / Model: FORD FALCON
Year: 2010
Stock Number: 00006494
VIN: 6FPAAAJGCMAY90540
Odometer: 1000 Kms
Colour: Red
OEM:
Conditon/Comments:
Part Also Fits

FALCON 2008 - 2016 FG-FGX, 05/08-12/16
FALCON 2002 - 2008 BA-BF, SEDAN/UTE, 10/02-0

[GTLEGEND]

Originally Posted by crmpicco

Is FG2 the same as FG MK2? If so, that’s what I have. Also, I’m slightly confused because the description of the item says it fits FGX until 2016. What do you think?

Item Details

Make / Model: FORD FALCON
Year: 2010
Stock Number: 00006494
VIN: 6FPAAAJGCMAY90540
Odometer: 1000 Kms
Colour: Red
OEM:
Conditon/Comments:
Part Also Fits

FALCON 2008 - 2016 FG-FGX, 05/08-12/16
FALCON 2002 - 2008 BA-BF, SEDAN/UTE, 10/02-0

Yes FG2 is same as FG MK2 which is what your vehicle is.

From the catalogue the two have different part numbers so there must be a differnce.

BA BF FG Mk1 2002-2011 use bottle BA17618A.

FG Mk2 & FGX 2011-2016 use bottle BR2Z17618AA.

So based off the catalogue (which has been wrong in the past) it advises two different bottles between the above models. Soto be sure if getting a used bottle, get one out of a FG2 or later.

[jackojm]

i am after the two for the front and rear top door mould for right hand side
post code is 4035

[GTLEGEND]

Originally Posted by jackojm

i am after the two for the front and rear top door mould for right hand side
post code is 4035

Hey mate,

You need to be a bit more specific than that!

What vehicle/model etc.

GT

[jackojm]

Originally Posted by GTLEGEND

Hey mate,You need to be a bit more specific than that!What vehicle/model etc.GT

Originally Posted by jackojm

i am after the two for the front and rear top door mould for right hand side post code is 4035

2009 Ford FG Sedan XR6T sorry

[GTLEGEND]

Originally Posted by jackojm

2009 Ford FG Sedan XR6T sorry

Getting there, now do you mean the mould that runs right along the top of the door or the mould that runs along the bottom of the window on the door.

Maybe add a pic for clarity.

[jackojm]

Originally Posted by GTLEGEND

Getting there, now do you mean the mould that runs right along the top of the door or the mould that runs along the bottom of the window on the door.Maybe add a pic for clarity.

it is the rubber around the top od the door see attached photos sorry not used to this site John

[GTLEGEND]

Originally Posted by jackojm

it is the rubber around the top od the door see attached photos sorry not used to this site John

RHF is $560 & RHR is $1200

Rubber is part of the moulding.

[jackojm]

Originally Posted by GTLEGEND

RHF is $560 & RHR is $1200 Rubber is part of the moulding.

can you ship to me at
john jackson
10 huntingdale court
albany creek Qld 4035

and how do i pay you

[GTLEGEND]

Originally Posted by jackojm

can you ship to me at
john jackson
10 huntingdale court
albany creek Qld 4035

and how do i pay you

Hapy to help try and get, send me a PM and we can go from there.

GT

[Citroënbender]

Hello mate,

What’s the availability of BA17E919A, please?

Thank you.

[GTLEGEND]

Originally Posted by Citroënbender

Hello mate,

What’s the availability of BA17E919A, please?

Thank you.

Hey mate,

Obsolete, but this dealer has I gather the last one left.

https://www.ebay.com.au/itm/15113643...Bk9SR_zGvbGPZA

[Citroënbender]

As the Americans say, he’s certainly proud of it!

Thank you for checking. At his asking price of near triple retail, I’ll happily choose a good used part.

[jackojm]

Originally Posted by GTLEGEND

Hapy to help try and get, send me a PM and we can go from there. GT

details of vin and payment

Message:

Date: Thursday, 4 July 2024
Time: 05:18 pm Sydney/Melbourne time

Receipt#: N270444992803
Transfer from: JOHN JACKSON
To account: BSB: 012-437
Account number: ******561
Amount transferred: $1760.00
Description: CAR MOULDING JOHN JACKSON


vin.jpg

[GTLEGEND]

Originally Posted by jackojm

details of vin and payment

Message:

Date: Thursday, 4 July 2024
Time: 05:18 pm Sydney/Melbourne time

Receipt#: N270444992803
Transfer from: JOHN JACKSON
To account: BSB: 012-437
Account number: ******561
Amount transferred: $1760.00
Description: CAR MOULDING JOHN JACKSON


Attachment 107369

Ok once cleared I will start the process of ordering etc..

[jackojm]

Resized_20240705_102655_1720140427459.jpegResized_20240705_102713_1720140415675.jpegResized_20240705_102655_1720140427459.jpegResized_20240705_102713_1720140415675.jpegResized_20240705_102719_1720140412543.jpegResized_20240705_102706_1720140424717.jpeg

Originally Posted by GTLEGEND

Ok once cleared I will start the process of ordering etc..

photos attached sa req

john

[CamHarper]

Just after an owners manual for my 2006 BF F6 Tornado as it came with the regular BF Falcon owners manual, any information will be greatly appreciated. photos for reference.

image_123650291.JPG

image_123650291 (1).JPG

image_123650291 (2).JPG

[GTLEGEND]

Originally Posted by CamHarper

Just after an owners manual for my 2006 BF F6 Tornado as it came with the regular BF Falcon owners manual, any information will be greatly appreciated. photos for reference.

Attachment 107374

Attachment 107375

Attachment 107376

There was a change 9/2006, prior to this part number BA2T119K321A after BF2P19K321CA if thats of any help..

[E.T.]

Hi @GTLEGEND,

This is probably a real stretch!

Right hand BF wiper arm.

Can you get one anymore?

Cheers


Sent from my iPhone using Tapatalk

[GTLEGEND]

Originally Posted by E.T.

Hi @GTLEGEND,

This is probably a real stretch!

Right hand BF wiper arm.

Can you get one anymore?

Cheers


Sent from my iPhone using Tapatalk

Hey mate,

They are obsolete, but I may be able to find one for you.

Leave it with me for a day or so..

GT

[E.T.]

Originally Posted by GTLEGEND

Hey mate,

They are obsolete, but I may be able to find one for you.

Leave it with me for a day or so..

GT

Cheers!

A few passenger side around but yeh, I was too slow on the last drivers I saw listed at Bayford :(

[GTLEGEND]

Have managed to track down a RH wiper arm, very hard to find new.

PM if youare interested..

[wickerd]

Hi.I’m looking for a vrs gasket set to suit Boss 260 32v (2004 BA xr8 Ute)… any suggestions ? . I know that cheap ones aren’t necessarily good and good ones aren’t necessarily cheap .. any suggestions or advice would greatly appreciated . cheers

[nivekau]

Hi GTLEGEND,

aussiblue suggested I ask here to see if you can source a part for me.

I'm looking for SKU: 1L2Z-6622-AA It's the 'Engine Oil Pump Pickup Tube' which I believe was used on the Explorer 4.0L SOHC V6, among other Ford vehicles.

It's readily available in the US, but I need it quickly, so trying to source it in Australia.

[GTLEGEND]

Originally Posted by nivekau

Hi GTLEGEND,

aussiblue suggested I ask here to see if you can source a part for me.

I'm looking for SKU: 1L2Z-6622-AA It's the 'Engine Oil Pump Pickup Tube' which I believe was used on the Explorer 4.0L SOHC V6, among other Ford vehicles.

It's readily available in the US, but I need it quickly, so trying to source it in Australia.

Hi mate,

These are hard to find in Oz, I will have a look, but I suggest you try a dedicated Explorer wrecker (there are a few around) that also do new parts.

I will need check, but may take a while.

See what I can find.

GT

[nivekau]

Originally Posted by GTLEGEND

Hi mate,These are hard to find in Oz, I will have a look, but I suggest you try a dedicated Explorer wrecker (there are a few around) that also do new parts.I will need check, but may take a while. See what I can find. GT

Hi GT,
Thanks for responding so quickly!

A friend who has connections with Ford Australia made some enquiries today and was told that Ford hasn't stocked the part here in Oz for many years. So I don't hold much hope.

Cheers,
Kevin

[nivekau]

Originally Posted by GTLEGEND

I will need check, but may take a while. See what I can find.GT

Hi GT,
Please don't spend any time on this.

I thought the one I have was cracked, and I just had a look to see what I could do in terms of repairing it with a view to replacing it at the next oil change, but on really close inspection with a magnifier I don't think it is actually cracked, I think it's just a moulding artefact that looks like a crack!

So I don't think I need one after all. Sorry to waste your time!

[Baminator]

Howdy GT,

This may be a bit of a Hail Mary, but I'm looking for an Idle Speed Controller for my 1997 XH Falcon 4ltr. Figured it couldn't hurt to ask if any Genuine Ford NOS is still floating about, and if you even just happened to know the Ford part # that would be fantastic.

Cheers,
the Baminator

[fgpsi]

Hi , GTLEGEND

Do you have or do you know where I can get some fresh airbox torx screws for the FG Falcons. Also anyone know what size they are/ part number

Cheers